View Full Version : Someone please help me !
04-11-2001, 06:18 PM
I am getting a reedy pulse r 10turn motor and a tekin rebel esc do i have to break in the motor and how do I do that. If i dont then will be slower. ALso do I have to solder the wires on their
04-11-2001, 06:28 PM
im not firmiliar with that motor so i would know about if u had to solder the wires on it. but you should break it in cause it will have better performance and will last a little longer, it allows the brush to match the comm. i did it by driving about 5 packs through it real slow litting off and on the throttle slowly. also let the motor cool completely between packs and put one drop of oil on each brush before you start and keep the top of the motor oiled.
04-12-2001, 02:38 PM
rough is right!
04-12-2001, 05:54 PM
What kind of oil do i use?
04-12-2001, 06:01 PM
Be careful with the rebel. It has a motor limit. I think it is 10T, but I dont think I am ever going to test motor limits with my ESC, to be on the safe side. Another reason is that if you fry your ESC, I know on another messege board, no one has received their stuff back from Tekin, nor can they get in contact with them.
Powered by vBulletin® Version 4.2.2 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.