Stock Rated HP??

[Goin'Big]

Any of you guys know what the Stock HP output of this Zenoah is? I can have a Custom header made, since some .21s are rated at over 3.5 HP, could i possibly use a 1/8 pipe? I also have a stock Lost pipe that i'm gonna Experement with, i was thinking of Plugging the stock holes and opening the very end to create a "stinger" pipe. Anyone have any other suggestions to experimenting with tuned pipes? It's easy to gain some HP with a Good pipe, so i wanna.-Matt

------------------
1/8scale=Speed-Bump.

[need4speed]

the zenoah is rated at 2.0 hp. 2000 to 10000 rpm. id like to know the torque on it though.
www.zenoah.com (http://www.zenoah.com)

[Goin'Big]

I couldn't find our Engine on the Zenoah Site, it doesn't have a list for Car-Motors and it's not quite the same mototr as anything on their site. Your sure about the @ HP, though right? Do you think it would be Practical to replace the Sock motor with a .21? It seams like you'd loose a signifigant amount of weight, but i'm sue you'd loose some of the Monster-Torque too. Any insight?-Matt

------------------
1/8scale=Speed-Bump.

[need4speed]

the zenoah they just mainly use it for big airplanes. im not really sure about a .21 on the buggy.maybe 2 of them?

[Dave]

<font face="Verdana, Arial" size="2">Originally posted by Goin'Big:
Any of you guys know what the Stock HP output of this Zenoah is? I can have a Custom header made, since some .21s are rated at over 3.5 HP, could i possibly use a 1/8 pipe? I also have a stock Lost pipe that i'm gonna Experement with, i was thinking of Plugging the stock holes and opening the very end to create a "stinger" pipe. Anyone have any other suggestions to experimenting with tuned pipes? It's easy to gain some HP with a Good pipe, so i wanna.-Matt

</font>

[nutz4nitro]

the rating is 2 hp its true traxxas has or at least had the hp rating on the engine here on the site in the nitro products section