Help needed tuning Traxxas .12 for Nitro Hawk

[ToDaMax]

We just aquired a nitro hawk with a .12 trx engine. I have a t-maxx and was wandering if I would use the same settings for tuning it. It has a motorsave air filter and stinger exhaust. Currently I have the fast screw at about 2 3/4 turns out and the low end at about 3 turns out. It seems to idle ok, but dies on acceleration. Thanks

[Xenos]

Your Low speed screw is to rich, lean it out.. use samll incriments like 1/16 of a turn... it is really hard to do, so have patience....