Attaching a wing/spoiler

[LaxRox5]

How do i go about doing this? What should i use?

[nitroboy543x]

i put alot of CA glue on... never falls off:D

[Tazz R/C owner]

I used CA glue, but then It tore off... Then I used double sided tape... that works, untill it gets wet... Try 5min epoxy:)

[Russell+Rustler]

i made a custom plate and drilled some holes on the wing and the body i got some screws and nuts and the thing never falls off...

[Les]

Rox
The best way is to use some small nylon screws and nuts. Metal ones will work also. They wont come off unless you rip them out ar take them out yourself.
Les

[cubalz]

I agree with Les, I have always used the nylon nuts to hold my wings on and I've never had one come off yet.

[LLOYDY697]

I use double sided tape

[LLOYDY697]

I use double sided tape... I used to have screws and nuts but it snaped off.

[mystic184]

I used Pop Rivets on my stock body. That thing will never come off!

[tony_250r]

The ProLine GT body comes with cool aluminum screws and aluminum lock nuts. In all, I use double sided servo tape and the two aluminum screws with nuts (they don’t have to be from ProLine). My wing never has come off using this method.

[traxxascow]

Originally posted by tony_250r
The ProLine GT body comes with cool aluminum screws and aluminum lock nuts. In all, I use double sided servo tape and the two aluminum screws with nuts (they don’t have to be from ProLine). My wing never has come off using this method.

same here

[killer51587]

I use 2 zip ties:D i just drilled 2holes perfectly even and squard up then zipped it on cuz zips work for anything and everything and ducked tape to