View Full Version : Traxxas connectors
08-06-2010, 10:06 AM
******* lipos battery wires are 10 gauge and the traxxas connectors are for 12 gauge wire....Will I be able to fit the traxxas connector on this wire?
well venom has 5000MAH 35C liops out and 6400 MAH 20C coming out, maybe i should try those instead..
08-06-2010, 10:17 AM
The 10 gauge wire will work with the traxxas connectors. It's a tighter fit, but it works.
FYI, the Brushless E-Revo has 10 gauge wire with traxxas connectors.
08-06-2010, 10:36 AM
The Hyperion G3-VX5500-3S Lipos that I have comes with 10 awg wire; and I soldered them up to female TRX connectors no problem. Just used this regular 60W Hobbico Solder gun (http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXPR36&P=ML) and solder....no biggy.
08-06-2010, 06:43 PM
Turningy packs come with 8 gauge wire and solder up just fine
us a high watt iron though, at least 60w to get the job done better
Powered by vBulletin® Version 4.2.2 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.