New 2.4GHz

[Charger Man]

I just got my Traxxas Link System, the receiver is a 5 channel, and I was wondering how you bind the radio to the receiver? I have already tried to do this but it didn't work, I held the set button and turned the radio on, then plugged in my battery, and held the link button on the receiver and pressed the power button on my vxl system. I have the servo plugged into the channel one, and the esc into the channel 2. After I tried to do it the motor didn't go when I lulled the trigger, but the steering worked, but it was reversed. Can someone help me with this problem? And since I have a li-po battery the green led is lit on the esc but after i turn it on it flashes green and the led on the receiver is solid green.

And now my radio won't even turn on.

PLEASE HELP!!!!!!!

[Double G]

Did you get the manual with it? Best thing to do is go to the Support button and read the manual that has the new 2.4 in it (such as the current T-Maxx). Or go to Products, Accessories and click on the transmitters. Click on yours and you will see all the info you need. That's what I did.

[BBCorvette18]

check your batterys in the transmitter. The steering you'll just have to reverse using the transmitter. You might need to program the transmitter to the ESC so it knows where neutral is