what si the best way to get the nitro 4-tec started other than the e-z start

[Rct2764]

what si the best way to get the nitro 4-tec started other than the e-z start http://www.traxxas.com/ubb/confused.gif http://www.traxxas.com/ubb/confused.gif

[FORD_DragRacer141]

try using a pull start

------------------
...We HaVe IgNiTiOn...

[FORD_DragRacer141]

or a bump start but that requires a plane starter

------------------
...We HaVe IgNiTiOn...

[RC Rick]

Use the yank eliminator. It is by far the most versatile because its a drill too. Plus you don't have the drag of the PS.

- Rick -

------------------
9 years of R/C racing CAN'T go wrong!

[nutz4nitro]

a starter box would do it too but they can be a hassle. they are big,heavy,some are quite weak and some drain the batteries really quick. use a yank eliminator.

[Subaru]

on some high performance engines they don't come with a pull start so your only options are to use a bump starter or a starter box.

------------------
My Nitro Sport gets squirly at wot

[Subaru]

I would have to give the Dynamite starter box a try if i get a non pull start engine. It has glow plug "caddy" in it and a place to put your body clips. Also do i have to modify the stock engine mounts to put a non pullstart engine on?

------------------
My Nitro Sport gets squirly at wot

[nutz4nitro]

no u need to buy a new engine mount for it im not sure how much it is and ull need a non-pullstart flywheel and crankshaft

[t-maxxluv]

hey man try holding you rfinger over the pipe while starting only do this for about 2 seconds it will flood the carb but hold for 2 and let go while continuing to hold down that ez start button