06-19-2010, 05:27 PM
Man I cannot wait till my MMM 2650 kit gets here. Today I just took my truck out to the street to do some speed runs with my newly aquired 3s 35c 5000MaH battery I picked up yesterday. I changed the gear to the 18 tooth that came with the truck to see how fast it would go. Man all I can say is SWEEEEEET!:wub: Took a few minuets to get the hang of the throttle on take off but as soon as I got it just right the truck just carried the front wheels off the ground like 1/2 inch the whole time. I put on my anacondas from my Jato on the rear and some dirt hawgs on the front as not to trash the stock tires. Totally not easy to control at these speeds by no means. I had to stop because the esc temp was at 132 deg even with the fan running and the motor temp was at 176 deg. The motor does not have anyting on it like a heat sync or a fan for cooling but I knew I was not going to be out there long so I said what the hey. My MMM kit and motor fan is supposed to be here earltynext week so I cannot wait. This was my first run with a 3s as I have only had 2s 20c's. Just wish I could figure out how to stop the body from making that horrible noise when the rear squats. It is like it is just ripping plastic when it hits the tires.