PDA

View Full Version : Wish the Jato 3.3 had Reverse



JatoNJ
02-21-2010, 05:08 PM
I wish Traxxas added the reverse feature to this otherwise BEAST of a nitro. This thing gets moving like no other but once I had it pointing towards a curb there was no backing up so i had to take the walk and pull it out, guess the walk didnt hurt lol. do they make trans kits that would allow reverse?

boogiemantm
02-21-2010, 06:28 PM
Nope, there is no trans kit without replacing the entire tranny which would just be dumb. you'd have to sacrifice your second gear and destroy your high-end speeds.

You'll get better at not getting in positions that you can't work your way out of as you get used to the speed and handling.

JatoNJ
02-21-2010, 06:28 PM
Thanks Boogie

ineedjatohelp
02-21-2010, 09:32 PM
reverse is bad for ur tranny it puts enourmous stress on the gears its what causes most trannys to fail even in real cars

BrianG
02-21-2010, 09:52 PM
The only way to get reverse in the existing tranny would be to convert to electric, install the single speed conversion, and use the motor for brakes and reverse.

boogiemantm
02-21-2010, 11:52 PM
The only way to get reverse in the existing tranny would be to convert to electric, install the single speed conversion, and use the motor for brakes and reverse.

that's not true. there are nitro tranny's out there (even from Traxxas) that have reverse support. but it a) requires an extra channel on your receiver and b) doesn't allow for a 2nd gear in forward speed due to complexity

BrianG
02-22-2010, 12:28 AM
That is true, but not in the Jato tranny. The nitro revo has reverse and 2 speed.

T-maxx3.3racer
02-22-2010, 05:28 AM
YEs, as does the T-maxx 3.3 4909 and T-maxx Classic

boogiemantm
02-22-2010, 11:54 AM
Aha, didn't realize they were 2 speed as well. most i've seen with reverse (non-traxxas ones) do not have the second gear.

BIG-block
02-25-2010, 08:31 AM
The only way to get reverse in the existing tranny would be to convert to electric, install the single speed conversion, and use the motor for brakes and reverse.

This would be my option but my brother wont let me convert it and he does kind of own it since I gave it to him. Still, he hardly ever uses it.