View Full Version : Refusal servo steering. Summit.
Busurman
02-08-2010, 01:07 AM
Good day.
Denied servo steering in the freezing cold (-10C)
Servos do not react to the inclusion of nutrition. Do not even twitch.
At home, after 15 minutes everything is working properly. Water in the receiver there. Receiver dry. Other servos and motor are working properly.
Sincerely, Vladimir.
Traxxas Summit Truck RTR w/EVX2 ESC and TQ-4 2.4GHz Radio
Help please!
jamann
02-08-2010, 08:03 PM
Maybe the plastic gears froze up or the grease inside got too thick from the cold.I have replaced mine with metal geared servo's that i waterproofed myself the stock ones chewed the plastic gears off
IamRevoMaster
02-09-2010, 10:53 PM
Maybe the plastic gears froze up or the grease inside got too thick from the cold.I have replaced mine with metal geared servo's that i waterproofed myself the stock ones chewed the plastic gears off
I have had the same issue on my summit. Traxxas replaced at no charge. There higher grade servos should be metal more so for crawling useing high torque turning.
jamann
02-09-2010, 11:42 PM
I have had the same issue on my summit. Traxxas replaced at no charge. There higher grade servos should be metal more so for crawling useing high torque turning.
I'm using towardpro 996 r.Metal geared and cheap.I'm looking at kershaw designs servo metal geared and 208 oz of tourque each twice the stock power would be very helpful for crawling:)
Busurman
02-12-2010, 02:53 PM
I have had the same issue on my summit. Traxxas replaced at no charge. There higher grade servos should be metal more so for crawling useing high torque turning.
Thank you!
Can detail? What, where and how?
Powered by vBulletin® Version 4.1.5 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.