View Full Version : How to set stuff in the ESC?
01-15-2010, 09:11 AM
How do I set stuff like LVC with the ESC? I have read the manual that came with the car but it just says "setting 1 : " explains what setting one is" " etc ...it does not actually tell you HOW to enable those settings!!!:(
01-15-2010, 12:39 PM
The easiest way is with the castle link, although the ESC should already have the LVC set to auto lipo and 3v per cell.
01-17-2010, 01:40 AM
You pull full throttle to answer yes, push full brake to answer no. When you answer yes it will skip to setting #2. If you answer no it goes to the next option (auto lipo) if you're on setting #1 and say no to option #1 (no cutoff). Call tech support with everything in front of you. Walk you through it right over the phone.
01-17-2010, 10:05 AM
soo your saying I must :
Pull full throttle and turn the car on.
then press full brake ,
then press full throttle?
Powered by vBulletin® Version 4.1.5 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.