View Full Version : question about driveshafts
12-25-2009, 03:44 AM
Hello I have traxxas emaxx with mmm combo,and fow days ago I bought FLM hybrid bulks.Next I instaled dffs from ofna hyper 7, and the pinion in this diffs have 8mm.Standrad traxxas cvd will not work because they have 6mm.Now im thinking that i will buy 8mm cup and install it on the pinion from diffs and change my centere cvd abaut 180 degres.Orginal dogbone is on the gearbox and kardan(i dont know english word... translator show me "carding" or "gimbals") with diffs.Is this any problem when i instal kardan on the gear box but not on the diffs?Thanks for help. (sorry for my english)
12-25-2009, 05:10 AM
It's actually "cardan" which means "U" Joint. You will need to bore out your "U" joint to 8mm or just buy new center dogbones.
12-25-2009, 09:00 AM
I have traxxas cvd and 8mm cup for 1/8buggy diffs output but im asking "is there any problem with put cardan to gear box instead of puting it to the diffs?In instruction of traxxas cvd the cardan should be in diffs side not in gear box side...(instaling oposite of traxxas instuction inluded with traxxas cvd)"
Powered by vBulletin® Version 4.2.2 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.