mashers on slash? bug body?

[JonsStampede]

trying to figure out what direction I want to go with the slash. I am wondering how well the mashers will work on the slash? They seem a little close to the chassis and wondering if they would hit the body. Right now I just have a slash roller without a body. Have mashers on a pede that I am pulling VXL out of for the slash.

[sersly]

i picked up a set of mashers with rims ... they fit chassis wise but body clearance is definitely an issue lol


This is what I picked up;
tires
http://www3.towerhobbies.com/cgi-bin/wti0001p?&W=001730865&I=LXUM93&P=K
wheels
http://www3.towerhobbies.com/cgi-bin/wti0001p?&W=001730865&I=LXDNC4&P=K

I will try to get a pic up, still ironing out those details :o

[JonsStampede]

are you using the bug body?

[sersly]

some pics and clearance shots

http://i719.photobucket.com/albums/ww191/Bladderman3/IMG_2450small.jpg

http://i719.photobucket.com/albums/ww191/Bladderman3/IMG_2452small.jpg

http://i719.photobucket.com/albums/ww191/Bladderman3/IMG_2453small.jpg

http://i719.photobucket.com/albums/ww191/Bladderman3/IMG_2454small.jpg

http://i719.photobucket.com/albums/ww191/Bladderman3/IMG_2455small.jpg

[sersly]

nope, I have only bought the 69 charger body, I had one growing up :)

I only have my original bodies currently ... I do need a way to lift the body off the OEM body mounts to use these with a body on

From what I have seen, the bug body should work ok, imo

[1slash]

cool well dose some one have pics of geos on the rear

[macz]

Here is mine with mashers...on bug body and a trimmed stock body..
http://i545.photobucket.com/albums/hh383/maciejmm/KN001.jpg
http://i545.photobucket.com/albums/hh383/maciejmm/slash001.jpg

[1slash]

wow that looks good

[StampEph]

i picked up a set of mashers with rims ... they fit chassis wise but body clearance is definitely an issue lol


This is what I picked up;
tires
http://www3.towerhobbies.com/cgi-bin/wti0001p?&W=001730865&I=LXUM93&P=K
wheels
http://www3.towerhobbies.com/cgi-bin/wti0001p?&W=001730865&I=LXDNC4&P=K

I will try to get a pic up, still ironing out those details :o

I found those blue RPM crawler rims rub on my a-arms (front and back) with my widemod (using Stampede rear a-arms front and rear). The RPM stampede rear a-arms that I put on the front are especially tight. Had to dremel them quite a bit.

FYI...

Do you get any rubbing with your a-arms? Looks kinda tight in your pics, too...

[macz]

My baja rubbed some of the paint off the sides...

[sersly]

I run them only on the rear and so far, with out a body. Was only testing so did not get too carried away. The gearing was way too high during my test. I have not tried them with a lower gear ratio yet. That test is coming.

They did not rub on the rear with stock chassis parts. I also left on the stock wheel hubs.

[LEGENDRIVER43]

Here is mine on mashers, I have no clearence issues at all. the suspension is stock. these are the epic beadlocks with the mashers and my bug body.
http://www.dunebuggy.com/assets/usergallery/large/9846.jpg
http://www.dunebuggy.com/assets/usergallery/large/9848.jpg