View Full Version : twin 775 summit
02-09-2009, 09:54 AM
is it possible to run the twin motor plate with speed controller from e revo to make a twin motor SUMMITT!!!
02-09-2009, 01:17 PM
Not sure if you can physically fit them in there but you don't need a Revo speed controller.. it is the same esc that's on the summit. If you notice theres 2 reds and 2 blacks going to the motor.. you just take off one of each and hook it up to the other motor.
02-09-2009, 01:21 PM
Kershaw Designs offers mounting brackets for dual 700HO or dual 970 motors. Both of those setups will run just fine on the stock controller, and more or less fit in the truck, so I'm sure you'd be able to work something out with dual 775 motors. It may take some custom fabrication, because I'm not sure the stock E-Revo twin motor mount will hold the second motor high enough above the transmission.
02-09-2009, 01:49 PM
email KD and see what he says.
02-09-2009, 03:40 PM
.... or a brushless set up and an addition five lbs of lead for the equivalent power/weight. ;)
02-09-2009, 03:52 PM
brushless and summit just dont go together.
02-09-2009, 05:10 PM
..and if thats the case neither do dual 775, 770HO or 970 esp since they greatly increase the weight of the vehicle...
02-09-2009, 05:12 PM
a single 970 would probably work as well,,, good idea!!!
02-09-2009, 06:06 PM
the titan 775 is plenty powerful. when i tried the old wheelie trick of going in reverse and then quickly going full throttle forward doesnt work. the truck lifts the front end up. but right away flips onto its lid.
02-09-2009, 06:22 PM
lots,lots of torque!!!
02-09-2009, 06:25 PM
oh yeah. alot of torque. bone stock truck weighs in at 11.2 pounds. the titan 775 sure has the power to catch most people off guard.
02-09-2009, 06:38 PM
so 12+ with batteries.
02-09-2009, 07:15 PM
easily. more like around 13 pounds with batteries.
02-09-2009, 07:27 PM
was thinking the same.
Powered by vBulletin® Version 4.2.2 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.