Step by step my 2nd monster is waking up !!! (pics, vids and lists)

[Popoxx]

Thanks ! :cool:

Yep the E-Maxx body fits the E-Revo w/o big mods required. It's cool because as I destroy lots of bodies (hard bashing !), I often need to buy new ones, so a stock body already painted & with decals applied is perfect for me :) And I love the E-Maxx bodies, nice design and colors !

[tonkajeep34]

What suspension setup are you running? do you have the LT rockers in there or just the P2s in the innermost hole? It looks like you have more ground clearance than mine, but i can't decide if that's due to the tires or not.

I'm currently using HPI flux tires/rims.

[Popoxx]

Flux wheels are bigger than mine so it's not the reason.
I use P2 rockers but the pushrods are mounted in the inner holes, and I use hard springs (Pink in the front, Purple in the back), so my E-Revo doesn't sag when it's off.

[tonkajeep34]

Flux wheels are bigger than mine so it's not the reason.

Yeah i was thinking maybe the bigger wheels were just hiding the ground clearance. yours is a cleaner more open look so you could see the GC better.


I use P2 rockers but the pushrods are mounted in the inner holes, and I use hard springs (Pink in the front, Purple in the back), so my E-Revo doesn't sag when it's off.

Thanks! yeah i moved up to harder springs but it still sags so maybe i'll try those.

[Popoxx]

I did what I wanted to do for a long time : change the way I secure the packs ! (my SMC packs required specific mods to fit the boxes).

Up to now I used nylon tie wraps...

http://i181.photobucket.com/albums/x285/Popoxx/P1050253B.jpg


Here is what I did :

http://i181.photobucket.com/albums/x285/Popoxx/P1060134B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1060129B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1060126B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1060130B.jpg

[Popoxx]

And because I'm a hard basher, the retainer clips weren't strong enough to prevent the packs from sliding :

http://i181.photobucket.com/albums/x285/Popoxx/P1060093B.jpg
Left : twisted / Right : stock

So I installed hard foams :

http://i181.photobucket.com/albums/x285/Popoxx/P1060137B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1060138B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1060141B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1060142B.jpg

I'm going to test this new setup with another member of the Traxxas forum pdcsq who own an E-Maxx and a Flux :fear: Pics and vid soon :p

[tonkajeep34]

Looks good Popoxx, pretty clever way to keep them closed.

I think your foam idea will work. It's similar to what i do, only i'm using the foams that came with my e-maxx trimmed a tad and placed in the same as yours. Seems to work really well.

[oldbikedude]

Cool. :cool:

[Popoxx]

Here is the vid of the bashing session with pdcsq : http://www.youtube.com/watch?v=zldumeK2wZs.

Nothing outstanding, just fun :)

And here is the thread about it : http://monster.traxxas.com/showthread.php?p=4200646#post4200646.

By the way my battery door mod (posts 256 & 257) works great ! My packs can't move !

[traxxas basher]

Cool video,
Those drops to flat at the start seem brutal.
Is that Pede stock?

[broam]

man just joined in on this thread cuz im lookin out to trade my e-maxx for an e-revo (or just buy an e-revo...) i like craigslist but if i have to i will go to e-bay...

[oldbikedude]

Awesome vid. :cool:

[pdcsq]

Cool video,
Those drops to flat at the start seem brutal.
Is that Pede stock?

It's an XL5 Stampede with a full RPM upgrade and an ezRun 60 A combo running on 2S 5000mAh ***** hard pack.
Build thread here: http://monster.traxxas.com/showthread.php?t=490406

[broam]

well what are your plans for next upgrades/options????

[2fast2pass]

i liked the revo 3.3 body better,just raise it up

[Popoxx]

well what are your plans for next upgrades/options????

This truck is too perfect stock :( :p
So, no plans, just run it :)



i liked the revo 3.3 body better,just raise it up

I couldn't, I was at the max, the body posts aren't long enough... But I'm very happy with my E-Maxx body :D

[broam]

try t-maxx posts???

btw i love the look of an e-revo. how much was it to build to this point (only with the e-maxx body) i would like to do a build like this... (is it more ore less complecated then e-maxx cuz thats what i have now...)

[Popoxx]

A scratch build with lots of upgrades is really expensive : ~$1300 for mine :fear:
But it's really easy and fun to build an E-Revo like I did :)

[broam]

crap.. cuz i want to do a build like this... darn i have 2 wait till i have a job... darn...

[HobbyLover]

Maybe the new E-Maxx BE body will look better on the E-Revo then the 3905 body!!!!

[Popoxx]

I will buy one on ebay as soon as they are available so we will see :cool:














And I'm really happy with my 3905 E-Maxx body !! :fear: :D

[HobbyLover]

I can't wait to see the new body when you get one!!!

[traxxas basher]

Whats Next?
I think you need a Kershaw Designs LCG frame to top it off.

[Popoxx]

LCG ??!!! :lol:
I'm a basher I need HCG ! ;)

Next steps are a RC Solutions rollcage and ******* 5000mAh 2s1p 20C hardcase lipo packs :)

And I will soon test two promising products of a new small RC company (I can't say the name for the moment sorry) : wheel hubs (zero slop objective) and motor bracket (to eliminate flex) :)

[ksb51rl]

Moved from E-Revo forum to E-Revo Brushless forum by request.

[traxxas basher]

LCG ??!!! :lol:
I'm a basher I need HCG ! ;)

Yea but its the only bolt on Aluminum Chassis for the E-Revo right now
(I think?)
Thats cool that you got the thread moved to the BL fourm.

[jchristie600]

I have one question. When are you doing a Summit?

[Popoxx]

The Summit is a really innovative truck but it's just a modified E-Revo so it won't be funny for me to upgrade it. And I'm not a fan of rock-crawling, I prefer a fast basher MT :p

My next RC car will be a 1/5 MT :) But I don't know which one and when...

[traxxas basher]

My next RC car will be a 1/5 MT :) But I don't know which one and when...
Haha hint hint Traxxas!
Gas or BL?

[Kcaz25]

The Summit is a really innovative truck but it's just a modified E-Revo so it won't be funny for me to upgrade it. And I'm not a fan of rock-crawling, I prefer a fast basher MT :p

My next RC car will be a 1/5 MT :) But I don't know which one and when...

This 1/3 CLICK (http://www.autoblog.com/2009/03/12/video-3z-scale-bulldog-r-c-rider-worlds-first-rideable-r-c-car/)

Or BL!

Maybe even the rideable 1/3 scale with one of these: CLICK (http://www.castlecreations.com/products/neumotors/nm2200.html) 2230! LOL:fear:

[Popoxx]

I knew this vid, this MT looks good and sounds good ! But this size is almost ridiculous in fact :lol: Hard to test it in your little backyard :D

Of course if I build a 1/5 scale MT it will be BL :)
This Neu 2230 is impressive :eek: It looks like a turbine :p

[Kcaz25]

Yeah its awesome! LOL I've got plenty of land to run it on if I had it. But not what I'm looking for and way to expensive.

Good maybe you should do a big stretch BL savy!

Yeah those motors are huge! That pictured 2230 has a gearbox on the end of it.

[Toddman214]

What power supply do you have pictured?

[Popoxx]

This one I guess ? :

http://i181.photobucket.com/albums/x285/Popoxx/P1040649b-1.jpg

It's a Voltcraft FSP power supply. Here are its specs :

http://i181.photobucket.com/albums/x285/Popoxx/FSP.jpg

This setup is awesome :wub:

I just need my ******* 5000mAh 2S1P 20C hardcase packs which are still out of stock (-386) :(

[pdcsq]

This 1/3 CLICK (http://www.autoblog.com/2009/03/12/video-3z-scale-bulldog-r-c-rider-worlds-first-rideable-r-c-car/)

Or BL!

Maybe even the rideable 1/3 scale with one of these: CLICK (http://www.castlecreations.com/products/neumotors/nm2200.html) 2230! LOL:fear:

Absolutely love this 1/3 scale. Good for the kids too.
How much does it cost?

[pdcsq]

Good maybe you should do a big stretch BL savy!


How did you guess?

Hint (http://www.tcscrawlers.com/TCS-Flux-5T-conversion-kit-p-17912.html)

[Kcaz25]

LOL
It begs, nae needs 6s, but I'd be terrified of the 6s electronic brakes. I would make every effort to run mech brakes and/or wait for CC to come out with the HVcarMonster that could more safely handle the 6s electronic brakes.

Motor choice would be awesome by that time as well. Go with a CC 1518-1527 or maybe even a massive CC 1717! 1500-2000KV.

-Zack

[Popoxx]

Just a Merry Christmas

http://i181.photobucket.com/albums/x285/Popoxx/P1060464B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1060466B.jpg

See you next year with new projects :cool:

[traxxas basher]

Good to see you got your mashers on correctly for this shot.
Merry Christmas

[Don65Stang]

Popoxx: Would you mind posting your parts list for this build like you did on your E-Maxx build?

Awesome job on both builds!!! I'm drooling.

Thanks, Don

[Novarider]

Popoxx: Which truck do you like more your ERBE or your EMAXX? I love my ERBE but I'm considering getting another truck and I'm looking pretty hard at the EMAXX and I was just wanting to know your thoughts on each truck.

[HobbyLover]

I have the E-Maxx and love it, for my second truck instead of buying a ERBE I will be doing a Popoxx inspired E-Revo build from the ground up just like him! I love both of his trucks, Popoxx I will be starting my build shortly!!!! I'm excited!!! btw any update of putting a E-Maxx Brushless body on your trucks?

[Popoxx]

Thanks a lot guys ! :) And the build isn't finished, pics coming March :D



Would you mind posting your parts list for this build like you did on your E-Maxx build?

No problem :) PM me if you want the Excel file.

http://i181.photobucket.com/albums/x285/Popoxx/List1-1.jpg
http://i181.photobucket.com/albums/x285/Popoxx/List2-2.jpg

[Popoxx]

Which truck do you like more your ERBE or your EMAXX?

I prefer my E-Maxx just because you can upgrade it ad infinitum !! :p :p
And that's what I like in this hobby ! I prefer testing upgrades and improving strength & reliability rather than run my MTs :wacko: :D And I like the MT look of the E-Maxx. A stock ERBE is too pefect so it's not funny for me, and it's difficult to have a setup different from the other ERBE owners because the upgrade range isn't as important as the E-Maxx one's.
mistercrash wouldn't agree with me given the number of pages of his build thread :lol: But I want to propose plug & play means of improving an E-Maxx / ERBE, so that most of people can do it themselves.

From a driving/strength point of view, my upgraded MTs are equal (but a stock ERBE is really much sturdy than a stock EMBE !), they are both funny/easy to drive. Maybe my ERBE is easier to drive due to its light weight (11.3lb vs 12.7lb).

So if you like upgrading and fixing, and if you like a "standard" MT design, the E-Maxx is perfect for you (but I hope you have enough cash :D <_< ).



any update of putting a E-Maxx Brushless body on your trucks?

I would like to do it but I have too many 3905 bodies in my tool box ! I have to destroy them before buying other bodies, maybe... :p

I hope you're aware that it's more expensive (and longer) to start from scratch to build an ERBE rather than buying it directly and upgrading it step by step ? Except if you find good deals on ebay ! :D Can't wait the build thread I love them :cool:

[Don65Stang]

I hope you're aware that it's more expensive (and longer) to start from scratch to build an ERBE rather than buying it directly and upgrading it step by step ? Except if you find good deals on ebay ! :D

Whoa...I almost missed this part and had to read it again. So it is more expensive to build from scratch and only buying the parts (upgrades) I'd want? I thought it would be cheaper. :confused:

[HobbyLover]

Ya me too thats why I'm doing it, I thought that i could save some cash... Oh well i think that I might go ahead and do a build just for the thrill of it and to say "Ya I Built That" LOL

[HobbyLover]

How do you figure that it is more expensive? Instead of paying for all of the parts that you don't need (built into the price) and then when you order the upgrades you have a bunch of worthless parts laying around...that you paid for and aren't using... I know exactly what I want and will shop on e-bay for the core parts...

Here are the numbers

If i build one the way i want it:$779-$800 This is with all RPM parts Tekin RX8 2250 combo And Traxxas option parts and a little more...(No Radio or Batts) Most of us have those...

Buy one stock: From RCPlanet $674.95

So I spend another $120 to have a bulletproof truck.... Thats the way I will go...

Now add the option parts to 674.95 and you get a little more than $780 Just my .02

[Novarider]

You said "how do you figure it's more expensive" then went on to say that it actually DID cost more to build one... What you should have said was building one let's you spend your money where you want to. I understand what you mean it's just funny your post sounds like you don't think it costs more to build one then you say it did cost more.

If your just getting into electric or you don't have a 2.4ghz radio it's deffinatly cheaper to buy one stock. Or buy a roller, 2.4ghz radio and the brushless system you want. That's what I did and doing this WAS cheaper then buying a stock one.

[HobbyLover]

Ya I know what you are saying Nova, I didn't word that right..

[HobbyLover]

Well those numbers were using prices from a reseller, I will start building and buying and will find out for sure which way cheeper.. Ill keep you posted...

[SlashX]

It is cheaper to buy the brand new kit, sell off the parts you dont want, then upgrade from there.

Why do you think you see so many people on eBay (and here) parting out their RCs? The sum of the parts is worth more than the whole.

I had the same idea. Thought it might be cheaper to build an emaxx from scratch to save some money. After I found all the parts i needed on eBay and added them all up, it was more than double what a new truck would cost.

It is, however, more fun to build one from scratch. Of course, you could always just completely disassemble your new one once you get it. :rolleyes:

But we digress...

Popoxx, thank you for this thread. Your project has inspired me to restore an erevo i bought off here. The information in this thread is most helpful.

I cant wait to see any updates you have.

[Popoxx]

Thanks SlashX :cool: Pics coming soon ! (March...).
But don't expect original mods (except one ! :p ), it's hard to build a singular ERBE, unless you like painting bodies :D

[Nogas]

Popoxx, just wondering if the e maxx body fits straight onto the e revo, without anything more then new holes? Cheers

[HobbyLover]

You need to widen the opening for the bumper... Right Popoxx?

[Nogas]

Ok, thats easy, will the wing still fit?

[HobbyLover]

I'm not sure about that...Popoxx doesn't have a wing on his Revo for me to look at, I have one on my Maxx and a had to cut a notch in the back of the body, Not hard to do and it makes my truck look awesome. Here is a picture of my maxx with the wing.In the second picture you can see the the opening in the body somewhat. It is in the Back and center of the truck like this.]

http://i493.photobucket.com/albums/rr294/HobbyLover/PICT4460.jpg
http://i493.photobucket.com/albums/rr294/HobbyLover/PICT4458.jpg

[Novarider]

That truck does look good with a wing

[Pulse]

It might help Popoxx not to buy a new body every week :lol:.

[Popoxx]

Popoxx, just wondering if the e maxx body fits straight onto the e revo, without anything more then new holes? Cheers

You're right, new holes are needed. And HobbyLover is right too, you need to widen openings for the bumpers. But you forgot one thing ! ... ERBE decals :D Pics here : http://monster.traxxas.com/showpost.php?p=4108591&postcount=247.

About the wing, obviously you need to cut a notch as HobbyLover did (nice maxx by the way :cool: ).



It might help Popoxx not to buy a new body every week :lol: .

Sure, but I will be obliged to buy a new wing every week :lol: jk.

[Pulse]

Sure, but I will be obliged to buy a new wing every week :lol: jk.

Well, you don't have to cut it and then paint it.. and it's cheaper nanananana :lol:

[Popoxx]

Pulse 1 - Popoxx 0 :p

BUT ! ...I'm not a fan of wings with MT bodies :D

[Pulse]

Me neither I just use it because it helps not to wreak everything when I crash :lol:

[Nogas]

http://i493.photobucket.com/albums/rr294/HobbyLover/PICT4460.jpg


Nice, thats the go. Thanks HL.

[HobbyLover]

Thanks for the nice comments on my maxx, I like the wing myself... And will have picks of my E-revo soon!!!

[jeffreynichols]

Popoxx, great project post, very inspiring. Can you tell me what your run-time is with that setup with those LiPos?

Thanks!

[Tommyplumbr]

I wish my ERBE was Water/Snow Proof!! Makes me miss my E-Maxx.. :( Popoxx...I really enjoyed reading this entire thread...lots of great info! Thanks

[Popoxx]

Popoxx, great project post, very inspiring. Can you tell me what your run-time is with that setup with those LiPos?

Thanks :cool:
Average runtime is 25' with these SMC packs (2*2s 6000mAh 28C) and these MMM settings :

http://i181.photobucket.com/albums/x285/Popoxx/sdf-3.jpg

New packs coming soon ! :)



I wish my ERBE was Water/Snow Proof!! Makes me miss my E-Maxx.. :( Popoxx...I really enjoyed reading this entire thread...lots of great info! Thanks

You're welcome ! :D I think I will build a waterproof maxx or revo for the next winter, it's so frustrating not to run its MTs during the winter ! :(

[FUNBOSS]

Nice, thats the go. Thanks HL.

Gotta say that's one of the best looking trucks I've seen here! I love it!! In fact, my next body will be a Emaxx.

[HobbyLover]

Thanks for the awesome comment FUNBOSS!!

[HobbyLover]

Here is a better picture of the notch in the body that I took today...
http://i493.photobucket.com/albums/rr294/HobbyLover/E-Maxx/PICT3193.jpg

[Popoxx]

New vid !!

It was cold outside (again...) but I couldn't resist :D :D
Enjoy :p : http://www.youtube.com/watch?v=P_X_Gdy2tD4.

Broken parts :
- Rear bumper mount
- Body
- Tool box :lol:

And no stripped spur gear thanks to the HPP bracket :) :)

[danielhr77]

Love those jumps!!!

:)

[mistercrash]

That's a great vid. Funny about the tool box :lol: What a great bashing spot! but I'm sure you know about trees eh! They sometimes move in the path of your truck so watch out, they're sneeky. :lol:

[FangsCPO]

I don't know, it seems like a lot of work and very costly. I'd rather just start with the assembled ERBE and upgrade from there. Have fun!!

[asheck]

Nice, looks like alot of fun.

[jkelly2900]

What's an HPP bracket?

[MfizzleS62]

New vid !!

It was cold outside (again...) but I couldn't resist :D :D
Enjoy :p : http://www.youtube.com/watch?v=P_X_Gdy2tD4.

Broken parts :
- Rear bumper mount
- Body
- Tool box :lol:

And no stripped spur gear thanks to the HPP bracket :) :)


great vid !!!!!! your car runs awesome!!!!

[Ray00Ray]

Love the vid! Awesoem jumps. I rated you!

[Popoxx]

Thanks guys for these nice comments ! :) :)
Next time I will test my ERBE in a skate park :p

I wanted to show you the new look of my ERBE but I didn't receive an important part <_< So I think it will be ready mid-April !



What's an HPP bracket?

Have a look at this : http://monster.traxxas.com/showthread.php?t=511676&highlight=bracket (useful links post #22) :cool:

[jkelly2900]

That's a good idea. Just yesturday I hit a small pot hole and completely stripped the spur. Hope he comes out with one for the Maxx.

[pdcsq]

Hey Popoxx,

So you have fun and you don't even invite me!!

[Popoxx]

That's a good idea. Just yesturday I hit a small pot hole and completely stripped the spur. Hope he comes out with one for the Maxx.

It's hard to strip a spur with an E-Maxx ! Despite all the big jumps/crashes I did with my E-Maxx, I think I stripped the spur maybe only twice :)


So you have fun and you don't even invite me!!

Oops :fear: Sorry it was a quick and unscheduled session ! :D
I hope we could do a session soon (April...) in the new spot we have never tested :) PM sent.

[jkelly2900]

Yea, this was the first one I stripped after over a year of running. Still, a little extra hardware is always nice.

[Popoxx]

New look !! :) :)

I needed new lipo packs (and therefore a new chassis) so I decided to change the look of my ERBE as well ! Here is the result :

http://i181.photobucket.com/albums/x285/Popoxx/P1070426B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1070390B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1070391B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1070418B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1070425B-1.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1070421B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1070424B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1070410B.jpg

[Popoxx]

http://i181.photobucket.com/albums/x285/Popoxx/P1070392B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1070393B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1070417B.jpg


What's new !

- ******* 5000mAh 2s 20C hardcase lipo packs
- Black died chassis/rockers
- RC Solutions black rollcage
- Home-made rear brace
- FullForce RC carbon pushrods
- HPP motor bracket prototype


I replaced my SMC 6000mAh 2s 28C lipo packs because they lost their power and puffed during charge and discharge. So I decided to test the cheap ******* packs :

http://i181.photobucket.com/albums/x285/Popoxx/P1060548B-1.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1060555B.jpg

[Popoxx]

Black chassis ! Simple, common mod and great result :) :

http://i181.photobucket.com/albums/x285/Popoxx/P1060688B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1060758B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1060696B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1060760B.jpg

I cut and dremel these spots to install my lipo packs :

http://i181.photobucket.com/albums/x285/Popoxx/P1060699B.jpg


To protect the wires and to reinforce the chassis/bulk spots I bought a rollcage (4 months to get it due to post office malfunctioning...). Looks really strong and easy to install (don't forget threadlock). I raised a bit the body so that it doesn't rub too much against the rollcage :

http://i181.photobucket.com/albums/x285/Popoxx/P1070354B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1070360B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1070364B.jpg

[Popoxx]

I had bought FullForce RC pushrods a long time ago. Traxxas optional pushrods are great, I just wanted to test the carbon ones :) They are really lighter ! Carbon pushrods vs Traxxas (desanodized) tubes :

http://i181.photobucket.com/albums/x285/Popoxx/P1060735B.jpg


I found some liquid tape to cover the worn motor wires (finally !), excellent product :

http://i181.photobucket.com/albums/x285/Popoxx/P1060748B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1060764B.jpg


Here are some close pics :

- Lipo packs installation :

http://i181.photobucket.com/albums/x285/Popoxx/P1070408B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1070405B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1070400B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1070402B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1070403B.jpg

[Popoxx]

- Motor bracket & Tekno skid :

http://i181.photobucket.com/albums/x285/Popoxx/P1070378B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1070381B.jpg


- Rollcage :

http://i181.photobucket.com/albums/x285/Popoxx/P1070412B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1070413B.jpg


Hope you like it :cool: I will make a vid really soon !

[SlotterHouse]

Looks Great, Now all you need to do is the antenna mod.

IMO, the stock position is just plain silly...:wacko:

Here's mine for reference:
http://i217.photobucket.com/albums/cc299/20skittles07/DSC00563.jpg

[danielhr77]

WOW!!! I'm speechless, very nice work Popoxx!!!

Btw, I want that motor bracket!!!

:)

[tonkajeep34]

Looks like you're ready for the next season of bashing. As always looks great!

I'm still trying to get my hands on one of those hpp motor braces.

[David9301]

Popoxx: ******* 5000mAh 2s 20C hardcase lipo packs

I was under the impression that those would not be sufficient packs for the mmm/cc combo. Please let us know how they work out for you.

[freeagent]

Popoxx: ******* 5000mAh 2s 20C hardcase lipo packs

I was under the impression that those would not be sufficient packs for the mmm/cc combo. Please let us know how they work out for you.

They work just fine, you just have to watch your gearing. The motor doesnt require 120a at all times, just under full throttle.

[eemmaaxxxx]

Nice Popoxx! Liking that cage a lot.

[bigfol]

Looks good, where did you get the motor bracket from????Link please:unsure:

[FUNBOSS]

Popoxx, how are you liking the roll cage? Would you recommend it?

[freeagent]

Popoxx, how are you liking the roll cage? Would you recommend it?

I have the nitro version, its awsome, it protects, and keeps the chassis from flexing. Im going to add one to mine shortly.

[jackka]

i'v been looking at those carbon fibre rods from fullforcerc.

they seem like the best value and quality of any rods available for the ERBE.
they are so cheap and light and strong. and they're black!

How do you like them so far Popoxx?

[Popoxx]

Thanks guys ! :)



SlotterHouse : what's the problem with the antenna ? Mine isn't a problem :mellow: I don't see yours in your pic :confused:

danielhr77 : come here to take it if you dare ! :lol:

tonkajeep34 : normally the motor mount will be available in June, but HPP often postpone the release date unfortunately :(

bigfol : coming Mid-June :) :

http://i181.photobucket.com/albums/x285/Popoxx/P1060582B.jpg
(Nylon prototype)

Produced by HPP : http://www.hpp-germany.com/factory-shop/index.php?page=categorie&cat=4

Updates by HPP owner here : http://www.rc-monster.com/forum/showthread.php?t=25060.

David9301, FUNBOSS : tomorrow I run with pdcsq so I will let you know how good are the lipo packs and rollcage :cool:

jackka : a RCM member told me yesterday they don't hold out big jumps... I agree with you they look great and are really light, but maybe they aren't as great... We'll see tomorrow ! Traxxas tubes are excellent, no problem with them.

[SlotterHouse]

If you look, you'll see mine coming out of the receiver cover. To have the antenna wire go from the receiver, out into the great wide open, and then back up into the antenna holder/tube is a bad design IMO.

And you'll love that roll cage. Eliminates chassis flex extremely well...But I would suggest putting some type of protective materiel around the top part of the roll cage (Top hood area). I'm using Gorilla tape. This will help in preventing the paint from getting worn through by the rollcage when you'r landings are inverted....;)

[Popoxx]

Got it ! Classic mod :) Sure the original design isn't convenient, but it works. Thanks for the tip maybe I will give it a try :cool:

[SlotterHouse]

Any idea if that motor support will be compatable with the Tekno sways??

[Popoxx]

I think it will fit but I sent an email to Markus (HPP owner) to be sure.

[sevenie]

Not been here for a while, but as with your e-maxx great work. Nice to see we both had the same idea with the Liquid Tape, I did the same thing a while ago, got a bit trigger happy without the shell on.

Love the roll cage too.

[FreakyT333]

Slotterhouse- If you check out the RCM thread Popox linked earlier today about this mount there is a guy on there that gives a basic discription of how he used this mount with the Tenko sways. Sorry I'm not more specific I think its on page 2. He had to mod a few small things to get it to work.

Popox- I really like the new look, that roll cage makes it look all kinds of tuff and you did a great job matching up a very nice color skeem. How much weight did your new set up add? I have heard that cage is actually pretty light and you cut weight with the rods as well. I would be really carefull with those 100 amp batts, my 2s 5200 30c *******'s work pretty hard to push my truck geared 18/62... I'm sure if you drive like you said- no WOT and set your timing-0-5, start power- low and brake- 40 you should be ok.

[SlotterHouse]

[QUOTE=FreakyT333]Slotterhouse- If you check out the RCM thread Popox linked earlier today about this mount there is a guy on there that gives a basic discription of how he used this mount with the Tenko sways. Sorry I'm not more specific I think its on page 2. He had to mod a few small things to get it to work.

Ahh, Thanks FreakyT333. I found the post, and it doe's confirm that it will be an easy mod to make it work with the Tekno's.

Looks like I'll be in the market....;)

[Popoxx]

SlotterHouse : I received the answer from Markus, he doesn't know if the sway bar will fit his final version of the motor mount. Release date : mid-June !

sevenie : thanks ! This product is excellent, but normally, with the rollcage, I think I won't use it anymore !

FreakyT333 : thanks for the comment and tips :cool: I forgot to weigh the rollcage and I'm too lazy to dismantle it :fear: But my ERBE w/o wheels, body and batts weighs 7lb (3.2kg).

[Popoxx]

My ERBE is awesome !! :wub: With a 4s setup it can endure everything !

I did 2 long bashing sessions with pdcsq today and last week, and the breakages are minor : I bent a rear bumper mount (RPM ones on the way :p ), I broke a shock rod end and I destroyed this :

http://i181.photobucket.com/albums/x285/Popoxx/P1070510B.jpg
Rear axle carrier, stud axle and 2 bearings.

One of my new ******* packs has a connection problem (my charger only recognizes one cell), and another one puffed during its 2nd charge...
Cheap but risky, it's the rule with this type of packs.

And the power of these packs isn't enough for my taste, I will buy more powerful 2s packs soon.

pdcsq will post a vid of our feats soon (I hope :D ).

[Kcaz25]

Saweet! I hope the video will explain how you broke the parts in the picture above!! HEHE

[Popoxx]

Saweet! I hope the video will explain how you broke the parts in the picture above!! HEHE

Maybe, but I noticed that at the end of the session, during the check-up, it didn't happen after an amazing (or really bad :rolleyes: ) jump.

[crf450ish]

New look !! :) :)

I needed new lipo packs (and therefore a new chassis) so I decided to change the look of my ERBE as well ! Here is the result :

http://i181.photobucket.com/albums/x285/Popoxx/P1070426B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1070390B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1070391B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1070418B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1070425B-1.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1070421B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1070424B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1070410B.jpg


WHERE DID YOU GET THAT ROLL CAGE? PM me please! thanks!


EDIT: RC SOLUTIONS ROLL CAGE! NICE!

[pdcsq]

My ERBE is awesome !! :wub: With a 4s setup it can endure everything !

I did 2 long bashing sessions with pdcsq today and last week, and the breakages are minor

One thing to note, I drove Popoxx ERBE quite a lot, so the breakage might even be on me !! (Im' not as good a driver as Popoxx, for sure)

[Popoxx]

^^ I've often broken his Flux, E-Maxx and Stampede, so... deuce ! :p

RPM bumper mounts ! :

http://i181.photobucket.com/albums/x285/Popoxx/P1070514B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1070518B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1070517B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1070520B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1070519B.jpg

The nylon of these RPM mounts is harder than the stock ones of course but I hope they won't break too easily. We'll see :cool:

[Popoxx]

New vid !! :) :)

A long vid of 2 bashing sessions with pdcsq (my ERBE has the blue body) : http://www.youtube.com/watch?v=LuDRsR2IgH0 :cool:


Breakages :

0:00 : New spot (Devil's spot...<_< ) - Popoxx E-Maxx and ERBE.
- Popoxx E-Maxx : Integy front lower arm, 2 Big Bore shocks, 2 bellcrank posts, steering bellcrank.
- pdcsq Flux : pinion looseness, MMM bug.

1:54 : Classic spot - pdcsq E-Maxx (darkmaxx) and Popoxx ERBE
- Popoxx ERBE : one shock rod end
- pdcsq E-Maxx : one servo

4:45 : New spot (BMX track) - pdcsq E-Maxx/Stampede/HPI Flux and Popoxx ERBE
- Popoxx ERBE : one rear axle carrier w/ bearings
- pdcsq Flux : one battery mount + damaged battery.
- pdcsq E-Maxx : front bulk and lower arm
- pdcsq Stampede : bent battery

The ERBE was the most durable haha :p :p

You can post comments here as well : http://monster.traxxas.com/showthread.php?p=4484359#post4484359.

[Foxprogt]

nice truck :)

[Popoxx]

As the ******* 2S 20C 5000mAh packs aren't really powerful I wanted to test new packs. I've chosen the ProTek 2S 50C 5600mAh packs (link (http://www.amainhobbies.com/product_info.php/cPath/1389_1393/products_id/165097/n/ProTek-R-C-2S-Supreme-Power-Li-Poly-50C-Hard-Case-Battery-Pack-74V-5600mAh-ROAR-Approved)).

http://i181.photobucket.com/albums/x285/Popoxx/P1070832B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1070833B.jpg


Perfect fit ! :

http://i181.photobucket.com/albums/x285/Popoxx/P1070841B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1070847B.jpg


With my previous mod for the ******* packs I just needed to dremel the spot below not to damage the connectors :

http://i181.photobucket.com/albums/x285/Popoxx/P1070846B.jpg


My ERBE currently :

http://i181.photobucket.com/albums/x285/Popoxx/P1070887B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1070891B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1070902B.jpg


Quick review of the packs soon :cool:

[Popoxx]

New vid !! :p :p

My first session in a skate park with my BL E-Revo ! : http://www.youtube.com/watch?v=toV-xtvfT6Y (I hope the quality will be soon better...).

Breakages :

http://i181.photobucket.com/albums/x285/Popoxx/P1080016B.jpg
FullForceRC carbon pushrods are junk... I broke two of them today, the carbon holds out but not the alu threaded part. So I keep the Traxxas optional pushrods ! One of my pivot ball pops out the axle carrier, I decided to reinstall the stock ones with alu rings (they weren't released when I had installed the RPM ones). You can notice the RPM bearings suffered a bit ^_^

http://i181.photobucket.com/albums/x285/Popoxx/P1080013B.jpg
^^ this was the reason of a clicking sound I had since several sessions. It's the yoke of my front center driveshaft.


The ERBE is really sturdy on concrete, skids suffer but no worries !
My ProTek packs are great, long runtime (30-40 minutes), nice temps, no balancing problem, and they seem reliable, we will see if they are durable :fear:

Can't wait my vacations next week :D

[carraig042]

The ProTek packs look promising for sure and according to their specs they should have a good bit of power. :) My skate park experience was not near as good as yours! haha

-Brett

[Wildman4910]

Awesome vid!

Wicked truck,two thumbs up for a good build!

Keep them coming:)

[SlotterHouse]

The ProTek packs look promising for sure and according to their specs they should have a good bit of power. :) My skate park experience was not near as good as yours! haha

-Brett

Nice vid....Love the 3:22 mark..:cool:

Those ProTek packs are AWESOME!!

Soon to be ordering another set or two very soon....

[eemmaaxxxx]

Another great vid Popoxx! Vacation vids are the best!

[Popoxx]

I see you're as optimistic as me regarding ProTek packs ! :) I hope we're right !

Did you buy an ERBE finally Tom ?

[SlotterHouse]

I see you're as optimistic as me regarding ProTek packs ! :) I hope we're right !

Did you buy an ERBE finally Tom ?

Tust me, you're gonna love them. I however went with the fixed wiring style. Not yet a big fan of the removeable leads....

[danielhr77]

Hey Popoxx, nice vid!!! Wish I had a skate park here... You almost hit that thing on mark 3:22... :lol:


You can notice the RPM bearings suffered a bit ^_^

I noticed (maybe I'm wrong) that those bearings are not so good, right? I have the same setup, and I want to replace them with ceramic bearings...

Daniel.

:)

[Popoxx]

Tust me, you're gonna love them. I however went with the fixed wiring style. Not yet a big fan of the removeable leads....

Cool :)

I like the removeable wires idea : the packs are easy to carry (you can't damage the wires when your packs are battered in your backpack and you can superimpose the packs in a small box for example), and no balancing wires exposed !

But sure, on the long run the built-in female bullet connectors will wear out...

[Popoxx]

Hey Popoxx, nice vid!!! Wish I had a skate park here... You almost hit that thing on mark 3:22... :lol:


I noticed (maybe I'm wrong) that those bearings are not so good, right? I have the same setup, and I want to replace them with ceramic bearings...

Daniel.

:)

Kinda narrow yep ! (I hit this steel bar several times in fact :D ).

These bearings are RPM bearings, they aren't really sturdy... I use Acer Racing bearings with the RPM axle carriers of my maxx and no problem up to now :)
I can't say if these ceramic bearings worth the money because I didn't use them enough at the moment. We'll see the result after more bashing sessions !

[eemmaaxxxx]

Did you buy an ERBE finally Tom ?


She's on the way!!! :D

Just waiting for a couple of items (RC's) to sell on Ebay.

[Popoxx]

YEAAAAH !!!!! :D :D
I hope you won't give up this project :rolleyes:

[eemmaaxxxx]

YEAAAAH !!!!! :D :D
I hope you won't give up this project :rolleyes:


Plan is to get the Slash sold. The Slash is an awesome truck, and a pain at the same time. Awesome, because it is a blast to drive and very tough, and a pain because your destracted from the MT addiction :lol:

Something I thought about, which you may also have considered.........

The cross members on the roll cage looked slightly odd to me being bright silver. I wondered if Axial made some links or rods in the correct length. Ano Red or Blue, or green for the Grave Digger fans. Grey if your boring :lol: :fear:

Thoughts?

[Popoxx]

Hum the grey color of the rollcage braces isn't really odd in fact, above all when the body is installed :D I'm sure Axial have the appropriate posts I need to measure the brace size but because of my job I'm not at home currently. I will let you know Friday before my departure !

[Popoxx]

As promised Tom I measured the size of the rollcage braces : ~6.1cm (~0.3937"). So these Axial posts will fit with one or two 1mm spacers : http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXWDN9&P=7. Aesthetic problem solved ! :D

And now..... VACATIONS !!! :) :)

[eemmaaxxxx]

Red ano posts here we come!!! Might look aweful, but it will be different!!

When can we expect Vacation vids?

[Popoxx]

Black/Red theme : classic but always niiiice !

I will make vids but I think I will just crawl (quickly :p ) on the Breton rocks a the edge of the sea, peacefully... Nothing amazing ! See you in September :cool:

[Popoxx]

New vid !!

Back from holidays in Brittany with a stupid short video... <_< : http://www.youtube.com/watch?v=HkMu8ZFPeHk.

My summer workstation was great :) :

http://i181.photobucket.com/albums/x285/Popoxx/P1080026B.jpg


Some pics of the monsters :

http://i181.photobucket.com/albums/x285/Popoxx/P1080058B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1080059B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1080044B.jpg


And breakage...

http://i181.photobucket.com/albums/x285/Popoxx/P1080065B.jpg


I confirm my ProTek lipo packs are really great !
And the ERBE is a good rock-crawler despite the sensored MMM combo !

Don't forget a big bottle of WD-40 when you drive near sand/sea ;)

[danielhr77]

That video hurt my eyes!!! (and your wallet)... :D

:)

[freeagent]

Nice loft with a great view :cool:

Looks a bit un-balanced.. The front right seems to drop pretty hard. Thats the nature of front flips I rekon :lol:

[ArmyofDarkness]

Kamikaze!! That sand didnt look terribly soft to land on, and the height of the jump was kinda nuts :D

[eemmaaxxxx]

.











Jaw on the floor. Popoxx your nuts! Can I have a go???? Pleeeease :lol: With your truck, obviously.

[bearq3114]

how muchdid this cost you total

[Rusty+Jump=Fun!]

Your crazy Popoxx, I like that :lol:

[Divey1130]

Popoxx put's a new meaning to "bashing:. I am with you all the way as to having fun. Trucks look great and I might steal that roll cage idea from you. Keep up the great work.

Terry

[Popoxx]

This jump was stupid but it was so tantalizing :p

I could't make this type of jumps without the HPP motor bracket (http://www.hpp-germany.com/factory-shop/de/RC-Car-Zubehoer/Tuning/Tuningparts-fuer-TRAXXAS/Motorabstuetzung-fuer-E-REVO-BRUSHLESS-EDITION-?x6133d=a7069342e04627918573abc4027b2a3a), and the last version is now available ! :) I installed it yesterday it's a work of art. Ingenious design, perfect fit, high quality components and beautiful black anodizing :wub:

Previous version :
http://i181.photobucket.com/albums/x285/Popoxx/P1070378B-1.jpg

New version :
http://i181.photobucket.com/albums/x285/Popoxx/P1080067B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1080068B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1080109B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1080115B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1080116B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1080119B.jpg

It's worth it !

[danielhr77]

Very nice! But for 40 Euros has to be perfect!

:)

[eemmaaxxxx]

Nice! *adding one to cart*

I see you've got a lot of preload on your rear shocks Popoxx, which springs are you running??



BTW, the BEAST has arrived!! But I'm now stuck waiting for LiPo's. Jumping straight into a 6s setup of course!

[Bust4_Rhymes]

I love the mount and i'm wondering why traxxas didnt made them!
I'm looking to buy it but it seems its can only be purchases directly from the company it selft. Its about 55$ CAN without shipping man its expensive for what it is... do anyone got that from any other store??

[Popoxx]

Very nice! But for 40 Euros has to be perfect!

:)

PM sent :cool:



Nice! *adding one to cart*

I see you've got a lot of preload on your rear shocks Popoxx, which springs are you running??


BTW, the BEAST has arrived!! But I'm now stuck waiting for LiPo's. Jumping straight into a 6s setup of course!

Cool ! You can't be disapppointed ! :p
Regarding springs I use Pink front and Purple rear.



I love the mount and i'm wondering why traxxas didnt made them!
I'm looking to buy it but it seems its can only be purchases directly from the company it selft. Its about 55$ CAN without shipping man its expensive for what it is... do anyone got that from any other store??

This bracket is an original idea of the HPP Germany owner so of course only him sells it ! Sure it's expensive but production costs are high in Europe (he tried Chinese manufacturers but the result wasn't great...). Personally I don't regret the investment !

[eemmaaxxxx]

PM sent :cool:




Cool ! You can't be disapppointed ! :p
Regarding springs I use Pink front and Purple rear.




This bracket is an original idea of the HPP Germany owner so of course only him sells it ! Sure it's expensive but production costs are high in Europe (he tried Chinese manufacturers but the result wasn't great...). Personally I don't regret the investment !

Lets face it, €40 is well worth it when you consider the amount of time and effort, and down time waiting for and then replacing a motor plate! And you've got the added security when your jumping.

[Bust4_Rhymes]

Yeah i know for sure that cnc machines are exepsnive to run my uncle has 4 of these but i was asking for a reseller nears Us or Canada cuz the curency exchange between euro and cad are very high also shipping cost. We work hard for our money so its always good to save some :)

thanks

[Double A21]

Wow you have one sick truck

[Mustang63]

Popoxx, I am now totally convinced to get the E-Revo Brushless Edition. I am curious to know how much those Protek Lipo's are because they are so daring if the price is right:D:D:D:D:D:D:D:D:D:D

WOOOOOOOOOOOO!!!!!!! Page 11 and Post 400 WOOOOOOOOOOOO!!!!!!!

LOL

[anr2442]

:) 40 euros translates into 55 U.S. dollars!!! i wish we could get a group deal on the sexy finalized motor mount... Is that even possible Popoxx?

The cheaper the better and i'm sure we can get at least 10 people if not more to sign up within a week.

[Mustang63]

Do you use the long travel rockers? And what suspension setup???

[Popoxx]

i wish we could get a group deal on the sexy finalized motor mount... Is that even possible Popoxx?

It depends on how many people are interested in the HPP bracket.

I need to start a list ! Dear Traxxas forum members, if you want this bracket but you aren't able to afford it, please send me a PM.

[cmaynexblack]

I wish this was posted about two weeks ago?

[Mustang63]

Hey Popoxx, pdscq hasn't been on in a while so, do you have a link to your protek packs, and do they fit in the battery boxes of pdcsq's truck? Also, are these a good battery and do you reccomend them?

[Conrad859]

Here is what I did :

http://i181.photobucket.com/albums/x285/Popoxx/P1060134B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1060129B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1060126B.jpg

http://i181.photobucket.com/albums/x285/Popoxx/P1060130B.jpg
what kind of bands are those? I know I have seen them before but I can't think where.:o

[ArmyofDarkness]

They're just O-ring seals- stretchy enough to reach over both little posts/ screws, but not so stretchy that they will allow the door to flap about whilst bashing.

[Conrad859]

Haha, I got my dad in here to look at the pictures, and it dawned on me that those are o-ring seals, at the same time my dad told me. Then I scrolled down to see Army's response. lol. Okay well, thanks.

[Popoxx]

Do you use the long travel rockers? And what suspension setup???

P2 rockers with 5318X pushrods (inner hole), purple springs rear, pink front, 60wt shock oil.



I wish this was posted about two weeks ago?

Did you already buy it ? :D



Hey Popoxx, pdscq hasn't been on in a while so, do you have a link to your protek packs, and do they fit in the battery boxes of pdcsq's truck? Also, are these a good battery and do you reccomend them?

I don't own a Flux I can't tell you. My Proteck packs are these ones (http://www.amainhobbies.com/product_info.php/cPath/1389_1393/products_id/165097/n/ProTek-R-C-2S-Supreme-Power-Li-Poly-50C-Hard-Case-Battery-Pack-74V-5600mAh-ROAR-Approved), they're great, sure I recommend them. [Don't ask me the same questions in this thread and via PMs, choose one way please :cool: ].



what kind of bands are those? I know I have seen them before but I can't think where.

SuperTigre Carb O-Ring G60 ! (http://www3.towerhobbies.com/cgi-bin/WTI0095P?FVSEARCH=22020562&search=Go). Neil is right. I tested lots of O-rings, these ones are the best I found :)

[Conrad859]

Hum, one dollar for one ring plus 5-15 dollars worth of shipping. hey popoxx how many do you use total on the whole car 2 or 4?

[xenogears]

what kind of mesh do you have there underneath the mmm's fan?

[Popoxx]

Hum, one dollar for one ring plus 5-15 dollars worth of shipping. hey popoxx how many do you use total on the whole car 2 or 4?

Only 2, plus 2 as spare parts :p



what kind of mesh do you have there underneath the mmm's fan?

Between the MMM case and the mounting plate (http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXXFD3&P=ML) ? About 1mm.

[Conrad859]

Only 2, plus 2 as spare parts :p

Okay thanks I found some rings laying around so when I have time I am going to do the mod.

[kilgoja]

http://i181.photobucket.com/albums/x285/Popoxx/P1070410B.jpg

this is cool...finally found someone that made the revo into a monster truck like it should be...i always hated the car like body, low ground clearance, and car like wing on the back of the erevo....this one looks awesome...like the nitro revo 3.3...great job :)

[sideshow]

Hey popox what rims n tyres r they
I got similar tread tyres but very chunky and
Stick out abit on edges and hard to balance
I also saw a pic afew pages back u had diff tyres
Front n rear. Do the spikes give u better steering
Than the chunky grooved tyres

[speednut07]

awsome thread ..... LOVE it.... :)

[Popoxx]

Hey popox what rims n tyres r they
I got similar tread tyres but very chunky and
Stick out abit on edges and hard to balance
I also saw a pic afew pages back u had diff tyres
Front n rear. Do the spikes give u better steering
Than the chunky grooved tyres

Maximizer (http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXNWP7&P=7)rims and Masher (http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXVS54&P=7)tires ! The best setup I've ever tried :p
Mulcher tires (with spikes) give more traction but wear out quiclky on hard grounds. And these tires aren't produced anymore.



awsome thread ..... LOVE it....

Thanks :cool:

[sideshow]

Ok cool
I went thru the big tyre thread and seams alot of guys
Use the mashers
I see there is also 40 series mashers
But as long as I can balance them better than what I got now
I'll look at getting the mashers

[Popoxx]

Here is my next upgrade :cool: :

http://i181.photobucket.com/albums/x285/Popoxx/Shooting2.jpg

It's the new HPP wheel hub (http://www.hpp-germany.com/factory-shop/en/TRAXXAS/17mm-wheel-hub-with-secure-nut-and-center-nut), soon available. No more slope normally ! I will test it soon :p (I will post pics at least, my revo hates winter...).

I'm not really worried by the slight axial slope (look at my driving style...) but I want the best for my revo :D

[mistercrash]

It should be very nice, like their rear motor support. The two yellow parts, would that be O rings? Sure looks like it. I am not sure about that being the best idea. I wouldn't say it will get rid of slop but it sure will dampen it so that you can't feel it when trying to wiggle the wheel around, giving the impression that the slop is gone. Hmm... A piece that screws in the hex to get rid of the slop, now where have I seen that idea before. Is HPP going to address the issue of the motor popping out of the rear support? It's not a problem that occurs frequently from what I've read but it did happen.

[kirbysdl]

I learned in photography that you get a stable setup by touching strong surfaces directly to each other. Cheap tripods have a rubber or cork surface around the screw where you attach the camera. As you get up into the pro support gear, you see custom-fit metal plates that bolt directly to the camera body, which entirely eliminates wobbling even if the mount is stressed or torqued.

From that knowledge, it seems that the custom brass threaded inserts that people have been using here should see stiffer results than the HPP product. However, it's nice to not need a drill press to get everything working. =)

[Popoxx]

mistercrash : yep you're right about the O-rings, here is the explanation given on the HPP website : "The wheel hub will now be centered on the driveshaft by a special center nut with two NBR-O-rings. The large slop and the wheel hub wobbling is now effectively prevented.
Wheel hub, wheel nut and the center nut are made from high-strength aluminum 7075-T6. This material is mainly used in the modern aircraft construction. The steel pin for fixing the wheel hub onto the driveshaft is made of hardened steel and it is able to resist the power of brushless motors." Sounds promising :cool:

What about the "issue of the motor popping out of the rear support" ? What does it mean ? If it's a recurrent problem I can ask HPP owner to analyse that.

kirbysdl : thanks for the lesson, I will tell you if the HPP wheel hub gives great results :p

[sideshow]

hey mc and popoxx

the motor popped out of my rear motor mount
i have the one from germany too
but this was cause i was jumping ip about 20 ft high on a very steep jump
this is what caused my ticking noise i think as i recon i very clightly bent the blue motor mount or the centre diff housing
as i drove it for 20 ninutes not knowing motor had popped out which is the worsed part bout motor popping out
unless u remove body and have a look u wont know

i recon they should make the part that wraps round the motor wider so it locks into the last rib on the mmm
but that would involve bit more work so would put price up

someone should make a kit and sell the losi cv kits to convert the ebre
i recon would be under 100 bucks and doing this u get stronger shafts and all the slop is gone
say buy 20 shafts
when i bought the berings i bought pack of 10
and buy 100 drive cups
spend about 1000 bucks and u prob have 20 kits
sell for 70 to 80 bucks and u make a tiny profit

[cmaynexblack]

Any updates on this product? I do not have access to a drill press to make the upgrades. Any suggestions?

[WesselDoubleT]

Wow another amazing build thread from popoxx. I have read this one and the e-maxx build thread from start to finish and both are exceptional. Great work! Keep it up

[gixxer01]

I have an e-revo and the exact same battery packs, with no mods to the battery compartments and they fit perfect, a little on the snug side, but they work fine. I did remove the little battery spacer clamps that were inside the compartment, but thats it!
The wires come out the normal holes also.

[FoxhoundEP3]

Wondering what happened to poppox?

[Popoxx]

Wondering what happened to poppox?

(He moved far from his RC trucks and he works a lot :(( Sometimes he has a quick look at the forums and he wants vacation to run his monsters !!).

[FoxhoundEP3]

sorry to hear that poppox, i know sometimes i cant sleep because of the urge i feel to get my trucks running, hopefully soon you can get back into action.

[Double00]

popoxx c'mon pull you finger out!, you know that urge is in there, get them monsters rolling again!, I ve gone right through both of you e-maxx and e-revo threads abouth 6 months ago and its been too long.. boys need their toys.

http://www.youtube.com/user/pete00078?feature=mhee

[Popoxx]

I finally found the time to install the HPP wheel hubs and updated bracket ! :D

Wheel hubs

Here is the idea :

http://i181.photobucket.com/albums/x285/Popoxx/Shooting2.jpg

Here is the result, step by step (as usual !) :

http://i181.photobucket.com/albums/x285/Popoxx/HUbs.jpg

http://i181.photobucket.com/albums/x285/Popoxx/One.jpg
Washer, axle pin, thread lock.

http://i181.photobucket.com/albums/x285/Popoxx/Two.jpg
Hub.

http://i181.photobucket.com/albums/x285/Popoxx/Three.jpg
Center nut with grease.

http://i181.photobucket.com/albums/x285/Popoxx/Four.jpg
Wheel !

And tadaaa :

http://i181.photobucket.com/albums/x285/Popoxx/Blackhub.jpg
Bkack wheel nut.

http://i181.photobucket.com/albums/x285/Popoxx/Aluhub.jpg
Desanodized wheel nut.

And of course, absolutely no slop :wacko:

[Popoxx]

Updated bracket

Some people have had problem with the first version, the motor mount popped off during hard landings.
So HPP released a second version, larger (on the left) :

http://i181.photobucket.com/albums/x285/Popoxx/Brackets.jpg

Before :
http://i181.photobucket.com/albums/x285/Popoxx/Beforebracket.jpg

After :
http://i181.photobucket.com/albums/x285/Popoxx/Afterbracket.jpg


Now I have to trim this E-Maxx BL body to bash my revo soon ! (as soon as I find a nice spot around my new city) :cool: :

http://i181.photobucket.com/albums/x285/Popoxx/Revo.jpg

[ArmyofDarkness]

Some sweet pieces of engineering there, nice to see a company take onboard feedback and improve there designs, and quickly too.

[tbonemcniel]

Glad to see you posting again and updating us on the truck Poppoxx!

I took a lot of cues from yours and mistercrash's builds for my own.

http://traxxas.com/forums/showthread.php?8927662-New-Basher-Build

[tbonemcniel]

I tried to run the HPP brace, but was having trouble fitting it with my swaybars, so decided to forgo it for now unless I start stripping out a lot spurs. Then I'll have to come up with something.

[eemmaaxxxx]

Great! Popoxx is back, and I need to buy a new HPP brace and some hex hubs :D

How is the job Popoxx?

[Popoxx]

Some sweet pieces of engineering there, nice to see a company take onboard feedback and improve there designs, and quickly too.

Privilege of workshops :thumbup:
Markus (HPP Germany owner) is looking for designing new upgrades for RC cars, don't hesitate to share your ideas with it ;)



I took a lot of cues from yours and mistercrash's builds for my own.

Thanks ! I had already seen your build thread, good job looks sturdy ! Next time don't hesitate to post a vid of your revo at the skatepark :D It's a great place to bash, but sure the revo suffers a lot...



Great! Popoxx is back, and I need to buy a new HPP brace and some hex hubs

How is the job Popoxx?

Haha what a coincidence ! :lol:
I'm back because I left my job :p (amicable agreement). It was a great experience but I need novelty !

[87 GN]

hubs:thumbup:I like'em, why the grease?

[Popoxx]

I presume the grease allows to serenely screw the center nut with its two rubber o-rings (rubber = friction).

[87 GN]

ooook thanks that makes since...

[sideshow]

do we get any discount or free freight if u bought the crappy original motor mount on
the new upgraded version
i used it once and it stuffed up my motor pinion when the motor popped out and stayed out
on an angle

dont u just love research and development on parts that cost u 3 times the amount of the hop up part
to fix the problems they cause

thats twice now other parts have fkt up the rest of my revo

[Popoxx]

Research & Development = tests, risks, failures, improvements...
If you don't like being guinea pig, let the others play this role, you will save money.

[HPP2009]

do we get any discount or free freight if u bought the crappy original motor mount on
the new upgraded version
i used it once and it stuffed up my motor pinion when the motor popped out and stayed out
on an angle

dont u just love research and development on parts that cost u 3 times the amount of the hop up part
to fix the problems they cause

thats twice now other parts have fkt up the rest of my revo

Hi sideshow,

I'm sorry if you had some trouble with on of my products. Please kindly let me explain something. The chassis in only so strong as each component. The E-Revo plastic chassis is the weakest point. The HPP motor bracket V1 prevents stripping spuregears. On huge jumps the plastic chassis flexes so much, in some cases the HPP motor bracket popped out.

Therefor we improved the first version. Even with the new version your are able to popping out the motor. All you need is couple of giant jump and landings on a hard surface.

If you love these kind of huge jumps, spend your money into a reinforced aluminum or carbon chassis. Maybe a model plane is a more suitable hobby for you.

Please kindly send me a copy of your invoice, you will get your money back via PayPal. I'm very interested into satisfied customers.

Thank you very much

HPP2009

[ajb1205]

After taking a look at this thread, I just placed an order for the HPP hubs...probably will go on my T-Maxx for now but will probably end up on my E-Revo blushless conversion. Can't wait to try them out. Popoxx...thanks for all the info.

[tbonemcniel]

I plan on ordering two sets. One for my Parts Bin Basher ERBE, and another for my E-Slayer.

[sideshow]

narit ok i dont want refund or anything maybe free freight if i buy the newer model
i mentioned that they should have made the rear motor mount wider about 6 months ago
but i still think u should mod it even more
i think it should be even wider and have a lip on the edge so the lip locks into the groove on the 2200 motor
but this might make the fabricating process alot more involved so would add alot to the price
just a thought

[tingting44]

these hpp hex's look wicked and will be ordering some as soon as i can!!! any more updates on how these hex's have held up so far popp

[Popoxx]

It's still the winter here in France, my monsters keep hibernating :p
HPP hubs remove 100% of the slop. But to be honest, a basic HPI washer (Z699) removes 98% of the slop.

[87 GN]

which hubs for the HPI washer (Z699)?? HPP?? HPI??
7x12x0.8

[Popoxx]

Stock Traxxas hubs.

[87 GN]

is the 7mm a bit loose?
I know I am using the HPI hubs but the stub is 6mm.
http://traxxas.com/forums/showthread.php?8922029-SumRevo&p=5065568&viewfull=1#post5065568

[Brewers74]

Thanks for the info on the company in Germany I contacted him today and placed the order.Last week I tried the brass insert to the hex deal went all out threaded it to fit axle worked great,but had a long day Saturday on our local track and wore the brass down somehow now the slop is back. Not sure how long if will take to get the shipment over here to the US ill just have to have patience

[Popoxx]

is the 7mm a bit loose?

It's a tad loose indeed, 6mm inner diameter would be better.

[BlackSheep800]

What shock boots are these?


Updated bracket

Some people have had problem with the first version, the motor mount popped off during hard landings.
So HPP released a second version, larger (on the left) :

http://i181.photobucket.com/albums/x285/Popoxx/Brackets.jpg

Before :
http://i181.photobucket.com/albums/x285/Popoxx/Beforebracket.jpg

After :
http://i181.photobucket.com/albums/x285/Popoxx/Afterbracket.jpg


Now I have to trim this E-Maxx BL body to bash my revo soon ! (as soon as I find a nice spot around my new city) :cool: :

http://i181.photobucket.com/albums/x285/Popoxx/Revo.jpg

[Brewers74]

I just received the motor brace this weekend..haven't tried yet waiting on my dyed chassis.Looks to be well made only concern I have is I read somewhere I won't be able to use my 21/54 gearing does anyone know if that's a fact

[Popoxx]

What shock boots are these?

Bad Horsie (http://www.badhorsie.com/).



I read somewhere I won't be able to use my 21/54 gearing

I use a 19/54 gearing. I checked my Revo and I don't see why a 21T pinion won't fit. Suspense...

[NewbieToTraxxas]

Wow such a nice build. :eek:I've never really scrolled up to the emax thread before. I am mostly a pede guy.:cool: I'm hooked. Beatuful trucks. :thumbup:Time to start saving :D

woops this is the revo build. awkward.

[MITCH316]

Booked marked this...a lot of valuable info in here :thumbup:

[e-marc]

Salut popoxx ! Un petit bonjour du Québec !

I'm looking to buy a monster truck and i'm having a hard time to chose between the e-revo and the e-maxx , but I kinda like the e-maxx a llittle bit more with is "truckier" look . I'm familiar with t-maxx truck and know their weak points but for me I will go with the brushed version since we get a good amount of snow here in canada. I tought about buying a e-maxx and maybe later buy a summit what are you thinking about this?

Merci beaucoup!

[JJ1224]

awesome build man great videos!

[Popoxx]

http://i181.photobucket.com/albums/x285/Popoxx/P1100361_zpscfd7129a.jpg

Yes... I did it :(( I don't like seeing my trucks not used so I sold one to give it a second life !
It's a Traxxas forum member who bought it, I hope he'll post more pics and vids than I did these last years :o

Don't ask me if my E-Maxx is on sale, I could never do that, I keep pampering it ! :lol:

[NewbieToTraxxas]

Nooooooooooooo :(:((