looking for aluminum stering bellcracnks for jato 3.3?

[jlaudiorocks]

looking for aluminum stering bellcracnks for jato 3.3. i keep braking the stock ones if any know where to find them online it would be a great help :confused:

[ban-jato-runer]

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXTPP1&P=OW

http://www.rcsuperstore.com/product_p/intt7923s.htm

http://www.rcxshop.com/product_info.php?cPath=101_102&products_id=1421

these r all my sugestions for what ur looking for

[redck1979]

junk,
junk,
and more junk...

Integy makes the worst quality parts, they are a downgrade from stock parts...

if you insist on getting an aluminum bellcrank assembly go with New Era's Silver aluminum ball bearing steering kit (http://www.neweramodels.com/item.cgi?session_id=&part_id=2899) (<-- click!)...

but your better off staying with the stock setup...just change to the traxxas upgraded drag link w/bearings and switch all the bushings out in the steering assembly to bearings...

and another tip that will save your bellcranks, stay away from stationary objects...

[Desert JATO]

Redck1979 never advised wrong since i knew him
this is not a compliment rather than a word of truth
don't waste your money with garbage products that will never add something to your truck

[jlaudiorocks]

thx for the help.i guess i need to learn not to hit stuff ay 50mpr ****

[jlaudiorocks]

what do u think of the traxxas alum shocks any one try them yet, im thinking of up grading to them?

[ban-jato-runer]

get the gtr big bore

[redck1979]

what do u think of the traxxas alum shocks any one try them yet, im thinking of up grading to them?
they are pretty much the same as the stock composite GTR shocks that come on the jato, just they are a bit heavier than the stock ones...the only thing i myself like about the aluminum GTR shocks are the Tin-coated shock shafts, but you can buy them separate...

[jlaudiorocks]

kool thx i mite add them so i have a little more weight in the front so i dont pull high speed wheelies.