View Full Version : Revo to Slayer parts list
10-23-2008, 09:04 AM
I apologize if this has already been discussed. But anybody know where I can find a parts list to convert me Revo 3.3 to a slayer? Might even go with an E-Slayer so recommendations for motors would be good too. Thanks!
10-23-2008, 03:14 PM
I got this from a guy on ebay who sold everything to do this conversion, hope it helps
Traxxas SLAYER Push Rod Set - P/N 5918 (2 Packages)
Traxxas SLAYER Front and Read Turnbuckles w/ Ends - P/N 5938 (2 Packages)
Traxxas SLAYER Front Right Suspension Arm Set - P/N 5931
Traxxas SLAYER Front Left Suspension Arm Set - P/N 5932
Traxxas SLAYER Rear Right Suspension Arm Set - P/N 5933
Traxxas SLAYER Rear Left Suspension Arm Set - P/N 5934
Traxxas SLAYER Half Shafts - P/N 5456 (2 Packages)
10-23-2008, 07:59 PM
You also need a 2.5 chassis new tires and the Slayer tranny. Check pout the two part list and compare them.
Slayer part list (http://www.traxxas.com/PDF-Library/5908_parts.pdf)
Revo part list (http://www.traxxas.com/PDF-Library/5308_parts.pdf)
10-24-2008, 12:02 AM
I suppose to convert it you'll need the chassis too. I was going to do it on my 3.3 chassis so my tires sit closer to the body.
11-08-2008, 09:26 PM
transmission halves are the same part number for revo/slayer as for the chassis use the 3.3 it's just going to be a inch longer (at most) that's what I'm going to do...I'm even keeping the center diff in mine since the sc8 has one
Powered by vBulletin® Version 4.2.2 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.