Deans ultras good for a 4S setup?

[Dragonfueled]

I see allot of talk about bullet connectors on newer brushless systems. Is that just for the motor or do you need them for the battery also? I like the deans just wondering if it will be ok to use them with 2 2s lipos and the mmm neu setup? Also using 2 2s lipos , one on each side would be considered a 4s setup rite?

[Huge]

I use the deans on my 12S helicopter and pushed the system up to 113A (4300W) without problem.
They should do :)

[brushlessman]

I see allot of talk about bullet connectors on newer brushless systems. Is that just for the motor or do you need them for the battery also? I like the deans just wondering if it will be ok to use them with 2 2s lipos and the mmm neu setup? Also using 2 2s lipos , one on each side would be considered a 4s setup rite?
ha! deans are good up to 120v deans will work up to #10 wire they are better and more realiable and durrable than bullets. (no pun)

[JATODRIVER93]

do deans have a tight lock togheter or is it kinda easy to pull em apart?

[brushlessman]

its very easy to pull apart but i have never had one come loose in a crash

[outkast187]

they wont fall apart...
130+ amps and no problems here.

[Andrew32]

the deans should be fine. I personally use TRX connectors. Bigger so my fat fingers get a better feel on them:cool:

[JOCKS_RETURN]

Traxxas Plugs Are Better....

[YansagRevo]

Traxxas Plugs Are Better....

[brushlessman]

deans and traxxas connectors are basiclly the same, do the same job, and are both great connectors

[JAKETHESNAKE28]

the deans should be fine. I personally use TRX connectors. Bigger so my fat fingers get a better feel on them:cool:

I'm in the same boat! Huge fingers+traxxas connectors=happyness!