Help

[MambaRustler]

ok so my mamba max switch came off when i had a small crash and i dont know what to do?, should i contact cc or what? heres a pic of what happenned http://img401.imageshack.us/img401/2272/copy1ofpicture1ji4.jpghttp://img508.imageshack.us/img508/2725/copy1ofpicture2it3.jpg
sorry for bad quality pics were taking with webcam

[mkrusedc]

Did you tear the wire for the switch off from the esc?

[intrudn86]

From where the wire came off I would probably contact Castle Creations and see if they will fix or replace your ESC. Unless you are really good with the solder iron, I wouldn't take a chance at them not replacing it. They are really good with their customer service. I recently had my ESC meltdown and they replaced it with no problem.

[MambaRustler]

From where the wire came off I would probably contact Castle Creations and see if they will fix or replace your ESC. Unless you are really good with the solder iron, I wouldn't take a chance at them not replacing it. They are really good with their customer service. I recently had my ESC meltdown and they replaced it with no problem.

ok then thats what ill do how do i ciontact them by email or phone either way tell me their email and if the have phone number that will help too

[rusty nail]

you might be able to solder a short wire connecting the two points so You don't even have a switch. It will just come on when every you plug in the battery.

[Unsullied_Spy]

That happened to me the night I installed mine, was in too big of a hurry to run it and didn't secure the switch, got caught in the rear wheel and tore the positive wire out. I used a cheapo soldering iron with a very fine tip and soldered it back on, but later the whole wire broke so I sent it back to Castle Creations. It'll take several weeks to get it back (I sent mine in back in June and haven't gotten it back yet :() but they should fix it no questions asked.

[MambaRustler]

how do i contact them?

[Unsullied_Spy]

how do i contact them?
http://www.castlecreations.com/support/contact.html

[MambaRustler]

thanks unsullied spy your a big help

[intrudn86]

That happened to me the night I installed mine, was in too big of a hurry to run it and didn't secure the switch, got caught in the rear wheel and tore the positive wire out. I used a cheapo soldering iron with a very fine tip and soldered it back on, but later the whole wire broke so I sent it back to Castle Creations. It'll take several weeks to get it back (I sent mine in back in June and haven't gotten it back yet :() but they should fix it no questions asked.
I think it took me about three weeks to get my Mamba back from Castle Creations.

[mkrusedc]

They must be slow. 2 years ago I got the replacement before I sent off the damaged one. Usually their customer service is excellent!