View Full Version : Need a body that will cover Gorilla Maxx chassis
06-22-2006, 10:04 AM
I installed my gorilla maxx chassis and the batterys are so low that the body leaves the bateries vulnerable to rocks that the tires kick up (not to mention it isn't very ethestically pleasing). Is there a body that is taller or some other way to protect the batteries?
06-22-2006, 10:53 AM
Try a van style body and lower the body posts so it mounts lower.
06-22-2006, 02:18 PM
...lower the body posts so it mounts lower.I'd just do that for whatever body you have already.
06-22-2006, 02:42 PM
I'd just do that for whatever body you have already.
I have the rpm shocktowers and mounts lowered as far as they will go and there is still more than inch between the chassis plate and the body.
06-22-2006, 11:27 PM
buy a new body and do not trim according to the body lines on the sides and try to keep all the extra side wall to extend down to the chassis
Powered by vBulletin® Version 4.1.5 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.