View Full Version : Drive Shaft
06-16-2006, 12:07 PM
Does any one have T-BONZ HARDENED STEEL CV DRIVE SHAFT. Are they strong or dont spend the money. I twisted my back drive shaft in half so need to find stronger one. thanks stretch91
06-16-2006, 06:09 PM
Get MIP CVD's worth every penny you spend on them!
06-16-2006, 08:23 PM
MIP's Ok. I have a high-power brushless system and ue is the only one to hold up.
06-18-2006, 05:24 PM
what is MIP CVD and ue and how sells them.
06-18-2006, 06:04 PM
MIP is Moores Ideal Products, and they make high quality Constant Velocity Drives for many cars and trucks as a hop up option. www.miponline.com
UE is Unlimited Engineering and they are the the proclaimed greatest RC parts manufacturer in the world. They manufacture all the Racer X and Supermaxx parts for the T-Maxx and E-Maxx, and their steel and Titanium CVD's are the best you can get for your T/E-Maxx. www.unlimitedengineering.com
06-18-2006, 06:07 PM
both are hardend steel Constand Velocity Drives. Much like the CV axels on a 1:1 front wheel drive car. These (either one IMO) are the best upgrade to stock drive shafts. UE's are more expensive but worth it from what i have read. Remember you will need to order 2 packages to do the whole truck
Another alternative is to go to 3.3 Revo/Tmaxx driveshafts. if you do that check Ebay, you can usually ge them cheap. Also if you do that, you will Need new stearing knuckels i would recommend These by RPM (http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXLMV7&P=0)
06-19-2006, 09:27 AM
Will this work for e-maxx MIP Shiny CVD Kit T-Maxx 2.5
06-19-2006, 09:36 AM
Yes, that is what I use. Except for the center drive shafts, you have to get the e-maxx version b/c they are different lengths.
06-19-2006, 10:37 AM
for the wide e-maxx
06-19-2006, 10:40 AM
Yes that is correct.
Powered by vBulletin® Version 4.1.5 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.