Proline Steering Kit Problems

[Netman]

I installed my kit and am having a bit of trouble. I dont know where it went wrong. I mean the instructions are straight forward. Now that the kit is installed it is very hard to use the steering turnbuckle in my hand and turn the wheels. I am not sure what is wrong here. I looked over everything and double checked the instructions that came with it and all looks good. I played a bit with the tension on the spring but that didnt change anything.

Does anyone have a pic of this installed? It would be great if someone has a pic of this installed on the GMAXX chassis.

Thanks

[Netman]

I loosened the two screws that attach the drag link to the bellcranks. This helped some but it still seems difficult to turn.

[offset]

Not sure if this will help but here are 3 pics of it installed on my stock chassis:
http://members.cox.net/lectrol/pl1.JPG
http://members.cox.net/lectrol/pl2.JPG
http://members.cox.net/lectrol/pl3.JPG

[AzCrazy1]

I ran into the same thing this past weekend. It is a fairly easy fix. The side of the servo saver that goes next to the chassis must be flat. I then used a small bearing spacer between the chassis and bearing then put the screws back in. No more binding.

Good luck