View Full Version : Fail Safe
I installed the venom fail safe, now when I apply the brakes on the rusty, brakes are applied as well as the throttle accelarating. I turned the pot counter clockwise. Wasn't able to experiment any further on it, do I have to turn the pot clockwise?
01-31-2005, 11:45 AM
yes, You have to turn it clock wise make sure you have the car and throttle on so u can see. The servo should move when you are moving the POT and make sure you set it right so it will apply the brakes.
01-31-2005, 05:52 PM
Be careful though, mine stripped out. I run dynamite race savers on my 2 cars now, hold the brakes, push the button and done.
02-01-2005, 06:25 AM
Dynamite it what I run as well. I would highly recomend them, it was like a 2 second instal and it was done. They are the cheapest ( at my LHS) and it was quick and easy.
02-01-2005, 12:31 PM
i have the dynamite's also quick easy and painless install.
All The Way
02-01-2005, 10:16 PM
so is this
Powered by vBulletin® Version 4.1.5 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.