Is thier a better servo saver

[Red Rustler]

Who makes a good servo saver for the steering
servo on my rustler? I've only have 8 to 10 runs on my rustler and the servo is clicking when I turn.

[Alan]

Thats what mine did the first time I got. Is it still turning.



------------------

[Alan]

Make sure that the screws are not crewed on to tight or that there is no rocks jammed in there. When mine did it, it would not turn one direction so I forced it and it never did it again but im not sure if there's beter ones but you can get a new of what ever you have.

Hope I was of some help.

wider is better.



------------------

[Red Rustler]

Yes the truck still turns in both directions. I took the servo saver off and ran just the servo back and forth. Servo made no noises at all, put saver back on and get the clicking sound.

[Alan]

You could just get a new servo saver.

------------------

[Traxxas Dude]

That means you have stripped a gear inside the servo. If you can definately tell a decrease in the turning ability than that is what it is. Don't bother fixing that one. Get a Hitec 605Mg servo. It is the best and it has a ton of steering in it. For $40.00 you can't beat it.

[jammintrax]

what the heck is a servo saver? Please post a pic, or a link.

------------------