help me plz help me

[25rustler1]

ok im tunin my truck from factory settings, and im leanin out the hspd needle and everythings goin ok, wheelies left and right, great speed and take off, and then it shuts off, and my ez start the motor light doesnt come on, but the glow plug does......help me plz......ne one?

[PaDrO]

Check the connections on the Starter motor mine has done this more than one time..:D

[18t turbo]

yea, make sure that the red wire and the black wire on the ezstart are connected right, and make sure that your 7.2 battery is charged. good luck^_^

[25rustler1]

well i just tried it again, didnt check ne connections, but if i wiggle it around in the ez start plug the motor light comes on, and the glow plug light, but nothin happens.....and my batterypack is charged

[RCfun1]

there could possibly be dirt in the ez start moter stoping it from turning. If not i have no idea.

[18t turbo]

hmmmmmmm, make sure that your ezstart input on the car, has no damage or bent, hopefully this will be the problem, or check for cut wires

[nrustler-man2]

as for it stalling it may be to lean, the ez motor, well there should be a yellow ground wire bolted to your chassis, check that, and as they said check the cennections,crimp them in you want, try and turn the motor manualy as the brushes can get dirty and need a "push" start sometimes, hope this helps

David Wright

[25rustler1]

good news.......took it all apart and cleaned, and the ez-start controler wasnt making it in the connection all the the way..so i took it off the battery box, and it works from.......thanx for the help