View Full Version : 2.5 tuning questions
01-02-2004, 06:33 PM
I have it pretty close I think. The only problem that I'm seeing is when I'm coming off a high RPM or high speed pass, when the engine starts to idle down, it will just die?? Is this a lean or rich condition and on which circuit is it?? Thanks in advance.
01-02-2004, 08:09 PM
Two things come to mind;
1) Check the idle with the brakes on and see if it tends to die down. That would be an indication that your slide is sticking in the carb.
2) Try a pinch test and see if your engine dies very quickly. Your lsn might be a bit lean.
Let me know.
Try turning the idle up a little or the high speed needle a hair richer or both. Let the engine cool then try different setting. A 16th of a turn makes a big difference on the 2.5.
Powered by vBulletin® Version 4.2.2 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.