View Full Version : Just got my new engine but...
EMAXX 1
06-28-2003, 03:29 PM
Got my engine on Thursday waited til the weekend to break it in. On my first tank or shall I say my first half tank I took a temp reading and it was 375 the factory seting were right, the carb is tight the back plate is tight running Traxxas 20% if I make it any richer it won't run, anybody have a suggestion?
tmaxxfreak
06-28-2003, 03:50 PM
i would check for a air leak some where before running better be safe then sorry. if not the carb has to be leaking to overheat like that lines tank head, header check for cracks on the carb. just some ideas hope this helps.:confused: :D
EMAXX 1
06-29-2003, 11:03 AM
I checked all of the above had new fuel lines on I may have a problem with my fuel tank not sealing going to get a new on today. My first 2.5 I had no problems with it in fact I used the same glowplug for about a gallon.
Powered by vBulletin® Version 4.1.5 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.