PDA

View Full Version : stalling!



nitro passion
04-18-2003, 04:38 PM
any suggestions besides tuning the carb to get rid of a stall?:( I have plenty of wheelie poppinc puch and power untill I about 250 deg f. then I stall time after time. I have tried every thing that was ever written in a manual, are there any more answers or help to fix this problem?

Pedeandrustler
04-21-2003, 11:04 PM
it could be your clutch

fatman915
04-22-2003, 09:02 AM
This may not pertain to your situation but I have noticed that after my truck comes up to temp. and I make very many high rpm runs my truck does the same thing. I have noticed that while holding the truck stationary with the wheels off the ground and I run it up to a high rpm the fuel tank becomes full of bubbles which will lean the engine and kill it very quickly.
Try running the truck at about half throttle or less for the whole tank and see if it cuts out when it comes up to temp. You problem may just be the bubbles in the tank. I haven't found a fix for it yet.

oachalon
04-22-2003, 03:38 PM
im having the same problem. For some reason i think it might be the stock tuned pipe. I think if we get an aftermarket tuned pipe it might go away. I think its too much of a build up of gas or something.

nitro passion
04-22-2003, 06:57 PM
the tuned pipe may be a good suggestion, my maxx does sound and feel like it is loading up with fuel no matter how lean i run it. if you try it, please let us know how it turns out!
nitro passion:D