Just bought a 2.5 engine for 117$ on ebay!

[mustangP51]

Is there anything else besides the clutch nut EZ start 2 and linkages that I need extra?
Thanks
Mustang

[Tazz R/C owner]

Unless it came with one that fits your truck/car, you will need a header and coupler as well, and, of course, the rest of the clutch assembly, but the clutch from most other engines will fit it.

[graphite07]

Originally posted by mustangP51
Is there anything else besides the clutch nut EZ start 2 and linkages that I need extra?
Thanks
Mustang


if u need the clutch setup i have a complete one with the clutch nut
i also havea rustler blue header for the 2.5 and a ez start fo it also.

[mustangP51]

Well the old clutch from the .15 will work too right?
Thanks
Jordan

[graphite07]

nope it will not work
http://members.cox.net/andrews239/nut.jpg

[mustangP51]

But I have the 2.5 clutch nut.
Mustang

[graphite07]

Originally posted by mustangP51
Is there anything else besides the clutch nut EZ start 2 and linkages that I need extra?
Thanks
Mustang

ohh i thought u said u didnt have it lol...
what rc is this going in? a t maxx or a ruslter? or a 4tec?

[mustangP51]

T-Maxx of corse!!!
Mustang

[graphite07]

okay u will need the header and pipe and throttle linkage and the throttle linkage post for the slide carb and you will need to drill a hole in your chassie to mount the post.

you will need this
link (http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXDDR6&P=7)
and this also
link (http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXDDZ3&P=7)

[mustangP51]

Sweat just looked the guy off of ebay sent me the compleat set of linkages! and pipe and header for 7.50shipped he was not supposed to give me the pipe and header!
Mustang

[graphite07]

good deal.......u have the link from ebay where u bought it from?>

[mustangP51]

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=34063&item=3120823731
That is the guy.
Mustang