View Full Version : help
Nothin better than Tmaxx
07-16-2001, 10:05 AM
when i put my brake on the engion dies
07-16-2001, 10:08 AM
i've been there. you need to take off your air filter and watch inside your carb. turn your idol screw and watch the port open up. do this with your engine running, and keep hitting the brake every now and then. you want that port to be open enought that it doesn't die when the brake is on, but not so hight that your engine is always reved.
07-16-2001, 11:07 AM
This should fix your problem...
Sounds link you need to adjust your trim on your radio and your idle... Adjust the trim on the radio so that the brake on the truck is applied...Next, reset the idle speed bythe idle screw on the side of the carb...Turn the idle screw counter-clockwise (to reduce the idle) or in your case clockwise (to speed up the idle)...Re-adjust the throttle trim on the radio as needed (so that the brake is no longer applied)... The idle should be set low enough that the truck doesnt try to move at idle...
Powered by vBulletin® Version 4.2.2 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.