instant shutdown

[R/C Agressor]

can anyone help me, I just put in a MIP 360 stinger and a yank starter well I finally got it started but the second I hit the throttle it shuts down on me whats going on? the glow plug is brand new and getting nice and hot, does the 360 stinger lean out or richen your fuel mixture?

I'm stumped! and I have blisters from the pull starter now, plaese help any advice would be appreciated!:confused:

[Bare Bones]

The MIP 360 pipe is kinda tricky. Theres no pressure fitting on the pipe for the pressure line so you might have the pressure line to far in the pipe or not far enough. About ½ inch of fuel line in the pipe.

After you install anything on the engine you should always richen it up abit.

[R/C Agressor]

thanks BareBones that sheds some light on my problem!:D I had about 1/8th of an inch in the pipe

[Bare Bones]

My brother had the same problem with his MIP 360 pipe.
Heres the instructions from MIP. http://www.miponline.com/insRuststing.html . Step 8


Hope that helps you R/C Agressor