it wont move

[jr32]

i hit a jump pretty hard and when i landed my car just reved everything is connected from what i see and its not my spur gear what fo you guys think it is????????

[Yippy_Skippy]

Check your output yokes and make sure that your grub screws are not striped. Also make sure that the spur gear is still aligned with the bell gear

------------------
I Love The Smell Of Nitro In The Morning

[BStebens]

yes, i did the same thing, it is the yokes, i bought hardened steel yokes, they run about $18

[rckid-123-2001]

The same thing happend to me but it could be a variety of things,in my case it was the spur gear got knocked outa wack.

------------------
WANNA RACE??????

[gatxnsport]

If it is not your yokes check your stub axles
it will rev and not go if you break a stub
axle. I have broken several. Just pull on each of your rear wheels and if the stub axle is broken the wheel will pull off.

[R/CRacingFool]

If non of the above work check your diff.

------------------
batteries are for flashlights

[WILKO]

The only thing that is wrong with your car is the planet gears are stripped, As long as your pinion\Spur gear aline,and your U-joints are connested, and of course you have your hubs inserted into your wheels, The only problem is your planet gears take them out buy some new ones from TRAXXAS about $6.00 and put all of the gears supplied in as long as you have it off put them all in and start fresh, VERY IMPORTANT lube your gears .

[traxxas racer 99]

yeah it is probably your planitary gears

------------------
"Mama, what are batteries?"

[nitro nut 14]

you might want to invest some of your money in a slipper cluch.they run around $20

------------------
JB Weld fixes anything!!!